...
首页> 外文期刊>Journal of Photopolymer Science and Technology >Photoresist Absorption Measurement at Extreme Ultraviolet (EUV) Wavelength by Thin Film Transmission Method
【24h】

Photoresist Absorption Measurement at Extreme Ultraviolet (EUV) Wavelength by Thin Film Transmission Method

机译:通过薄膜传递方法在极端紫外(EUV)波长下的光致抗蚀剂吸收测量

获取原文
获取原文并翻译 | 示例

摘要

A methodology to measure photoresist absorption under soft X-ray radiation is presented in this work. The high photoresist sensitivity required for the extreme-ultraviolet lithography (EUVL) technology can be achieved by increasing the EUV photon absorption of photoresist material, hence high extinction coefficient is preferred. To determine the extinction coefficient of a photoresist, a small-scale manufacturing process has been developed to obtain free standing thin silicon nitride (SiN) membranes and use it as sample holder for photoresist thin film characterization. The SiN membrane has been characterized in terms of film thickness, composition and density. Transmission measurements through the thin films of SiN and photoresist have been carried out in the energy range between 90.6 eV and 92.6 eV by using X-ray Absorption Spectroscopy (XAS) at the BEAR beamline Elettra synchrotron research facility, in Italy. The method permits an experimental measurement of the absorption coefficient of thin films, with an accuracy of 3 X 10(-4), providing a tool helpful for EUV photoresist research and development.
机译:在该工作中提出了一种测量软X射线辐射下的光致抗蚀剂吸收的方法。通过增加光致抗蚀剂材料的EUV光子吸收来实现极端紫外光刻(EUV1)技术所需的高光致抗蚀剂灵敏度,因此优选高消光系数。为了确定光致抗蚀剂的消光系数,已经开发了小规模的制造工艺以获得自由常规的薄硅氮化硅(SiN)膜,并用作用于光致抗蚀剂薄膜表征的样品保持器。 SIN膜的特征在于膜厚度,组成和密度。通过在意大利的BEAR BEARLELERTRA SYNCHORON研究设施中使用X射线吸收光谱(XAS),在90.6eV和92.6eV之间进行了通过SIN和光刻胶的薄膜的透射测量。该方法允许实验测量薄膜的吸收系数,精度为3×10(-4),提供了有助于EUV光刻胶研究和开发的工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号