Direct-patterned copper/poly(ethylene oxide) composite electrodes for organic thin-film transistors through cone-jet mode by electrohydrodynamic jet printing

摘要

Direct-patterned Cu-based conductive electrodes were printed through electrohydodynamic (EHD) jet printing via cone-jet mode. The introduction of a capping agent in the synthesis of the Cu ink limited excessive conductivity, which enabled the pristine Cu ink to achieve the various printing modes of EHD jet printing: dripping, micro-dripping, cone-jet, and multi-jet. We also obtained optimal printing conditions by adjusting the viscosity by adding poly(ethylene oxide) (PEO) to the pristine Cu inks, resulting in well-defined printing patterns. The optimized PEO content in the ink was determined to be similar to 10 wt%, which gave us a stable cone-jet mode and well-defined Cu/PEO composite electrode lines with sharp edges. We utilized the Cu/PEO composite electrode lines as source and drain and a triisopropylsilylethynyl (TIPS)-pentacene/PS blend as the active layer for bottom-gate bottom-contact organic field-effect transistors (OFETs). The resulting devices exhibited an average field-effect mobility (mu(FET)), threshold voltage (V-th), and on/off current ratio (I-on/I-off) of 0.253 cm(2)/V, 0.253 V, and similar to 10(6), respectively. (C) 2020 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.