首页> 外文期刊>Journal of Biomechanics >In-vivo analysis of sternal angle, sternal and sternocostal kinematics in supine humans during breathing
【24h】

In-vivo analysis of sternal angle, sternal and sternocostal kinematics in supine humans during breathing

机译:呼吸仰卧角度,胸骨和沉置胸腺癌的体内分析

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Abstract This paper aims at contributing to the understanding of the combination of in vivo sternum displacement, sternal angle variations and sternocostal joints (SCJ) kinematics of the seven first rib pairs over the inspiratory capacity (IC). Retrospective codified spiral-CT data obtained at total lung capacity (TLC), middle of inspiratory capacity (MIC) and at functional residual capacity (FRC) were used to compute kinematic parameters of the bones and joints of interest in a sample of 12 asymptomatic subjects. 3D models of rib, thoracic vertebra, manubrium and sternum were processed to determine anatomical landmarks (ALs) on each bone. These ALs were used to create local coordinate system and compute spatial transformation of ribs and manubrium relative to sternum, and sternum relative to thoracic vertebra. The rib angular displacements and associated orientation of rotation axes and joint pivot points (JPP), the sternal angle variations and the associated displacement of the sternum relative to vertebra were computed between each breathing pose at the three lung volumes. Results can be summarized as following: (1) sternum cephalic displacement ranged between 17.8 and 19.2mm over the IC; (2) the sternal angle showed a mean variation of 4.4°±2.7° over the IC; (3) ranges of rib rotation relative to sternum decreased gradually with increasing rib level; (4) axes of rotation were similarly oriented at each SCJ; (5) JPP spatial displacements showed less variations at first SCJ compared to levels underneath; (6) linear relation was demonstrated between SCJ ROMs and sternum cephalic displacement over the IC.
机译:摘要本文旨在为在吸气能力(IC)上的七个第一肋骨对的体内胸骨位移,胸骨角变化,胸骨角变异和骨质蹄系(SCJ)运动学的结合提供贡献。在总肺容量(TLC)中获得的回顾性编纂螺旋CT数据,中间的吸气能力(MIC)和功能性残留能力(FRC)来计算骨骼的运动学参数和12个无症状受试者的样品中的感兴趣的关节。加工3D肋骨,胸椎,孢子和胸骨的模型,以确定每根骨骼的解剖标志性(ALS)。这些ALS用于创造局部坐标系,并相对于胸骨和胸骨相对于胸椎计算肋骨和甘油的空间转换。在三个肺体积的每个呼吸姿势之间计算肋骨角位移和旋转轴和关节枢轴点(JPP),胸骨θ相对于椎骨的相关位移,并且在每个呼吸姿势之间计算胸骨的垂直变化和相关的位移。结果可以概括如下:(1)胸骨位移范围为17.8至19.2毫米; (2)胸骨角在IC上显示平均变化4.4°±2.7°; (3)肋骨相对于胸骨的旋转范围逐渐下降,随着肋骨水平的增加而降低; (4)旋转轴在每个SCJ上同样取向; (5)与下面的水平相比,JPP空间位移在第一个SCJ的变化较差; (6)在IC上的SCJ ROM和胸骨头部位移之间证明了线性关系。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号