首页> 外文期刊>Journal of Anatomy >Determination of retinal surface area
【24h】

Determination of retinal surface area

机译:视网膜表面区域的测定

获取原文
获取原文并翻译 | 示例
           

摘要

Previous attempts at determining retinal surface area and surface area of the whole eye have been based upon mathematical calculations derived from retinal photographs, schematic eyes and retinal biopsies of donor eyes. 3-dimensional (3-D) ocular magnetic resonance imaging (MRI) allows a more direct measurement, it can be used to image the eye invivo, and there is no risk of tissue shrinkage. The primary purpose of this study is to compare, using T2-weighted 3D MRI, retinal surface areas for superior-temporal (ST), inferior-temporal (IT), superior-nasal (SN) and inferior-nasal (IN) retinal quadrants. An ancillary aim is to examine whether inter-quadrant variations in area are concordant with reported inter-quadrant patterns of susceptibility to retinal breaks associated with posterior vitreous detachment (PVD). Seventy-three adult participants presenting without retinal pathology (mean age 26.25 +/- 6.06years) were scanned using a Siemens 3-Tesla MRI scanner to provide T2-weighted MR images that demarcate fluid-filled internal structures for the whole eye and provide high-contrast delineation of the vitreous-retina interface. Integrated MRI software generated total internal ocular surface area (TSA). The second nodal point was used to demarcate the origin of the peripheral retina in order to calculate total retinal surface area (RSA) and quadrant retinal surface areas (QRSA) for ST, IT, SN, and IN quadrants. Mean spherical error (MSE) was -2.50 +/- 4.03D and mean axial length (AL) 24.51 +/- 1.57mm. Mean TSA and RSA for the RE were 2058 +/- 189 and 1363 +/- 160mm(2), respectively. Repeated measures anova for QRSA data indicated a significant difference within-quadrants (P<0.01) which, contrasted with ST (365 +/- 43mm(2)), was significant for IT (340 +/- 40mm(2)P<0.01), SN (337 +/- 40mm(2)P<0.01) and IN (321 +/- 39mm(2)P<0.01) quadrants. For all quadrants, QRSA was significantly correlated with AL (P<0.01) and exhibited equivalent increases in retinal area/mm increase in AL. Although the differences between QRSAs are relatively small, there was evidence of concordance with reported inter-quadrant patterns of susceptibility to retinal breaks associated with PVD. The data allow AL to be converted to QRSAs, which will assist further work on inter-quadrant structural variation.
机译:以前在确定整体眼睛的视网膜表面积和表面积的尝试已经基于从视网膜照片,示意性眼睛和供体眼的视网膜活组织检查源自衍生的数学计算。三维(3-D)眼磁共振成像(MRI)允许更直接的测量,它可用于图像invivo,并且没有组织收缩的风险。本研究的主要目的是使用T2加权3D MRI,视网膜表面区域进行高级时间(ST),较差的 - 颞(IT),高级鼻腔(SN)和下鼻(IN)视网膜象限。辅助目标是检查区域的象限变化是否与报告与后玻璃脱离(PVD)相关的视网膜突破的间象限型常见模式。使用西门子3-Tesla MRI扫描仪扫描七十三名成年参与者(平均年龄26.25 +/- 6.06年),以提供T2加权MR图像,用于整个眼睛划分流体填充的内部结构并提供高度 - 玻璃视网膜界面的划分。集成的MRI软件生成了全内部表面区域(TSA)。第二个节点点用于划分外周视网膜的起源,以便计算ST,IT,Sn和象限的总视网膜表面积(RSA)和象限视网膜表面区域(QRSA)。平均球形误差(MSE)为-2.50 +/- 4.03D,平均轴向长度(Al)24.51 +/- 1.57mm。 RE的平均TSA和RSA分别为2058 +/- 189和1363 +/- 160mm(2)。对QRSA数据的重复测量ANOVA表明象限内的显着差异(P <0.01),其与ST(365 +/- 43mm(2))对比(340 +/- 40mm(2)P <0.01 ),Sn(337 +/- 40mm(2)p <0.01)和(321 +/- 39mm(2)p <0.01)象限。对于所有象限,QRSA与Al(P <0.01)显着相关,并且在Al中显示出视网膜区域/ mm的等效增加。虽然QRSAS之间的差异相对较小,但有证据表明与PVD相关的视网膜突破的次要态际模式相一致。数据允许Al转换为QRSA,这将有助于进一步研究象限间结构变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号