首页> 外文期刊>Zeitschrift fur Angewandte Mathematik und Mechanik >Buckling and post-buckling of a compressible slab under combined axial compression and lateral load
【24h】

Buckling and post-buckling of a compressible slab under combined axial compression and lateral load

机译:在组合轴向压缩和横向载荷下压缩板块的屈曲和后屈曲

获取原文
获取原文并翻译 | 示例
       

摘要

In this paper, we study the buckling and post-buckling of a compressible hyperelastic slab under both axial compressive force and distributed force on two lateral surfaces. The combined series-asymptotic expansions method is used to obtain the simplified model equations. We further assume that the lateral load is uniformly distributed and is a constant. We discuss three cases: (I) axial compression dominant, (II) lateral compression dominant and (III) uniform compression. In case (I), the lateral stress is given as a constant and no buckling bifurcation will occur when the axial stress is not imposed. In this case, the lateral stress may be compressive or tensile stress. In case (II), the axial compressive stress is given as a constant and no buckling bifurcation will occur when the lateral compressive stress is not imposed. In case (III), the slab is uniformly compressed at two lateral boundaries and two ends of the slab. For all three cases, with sliding-sliding end conditions at two ends, we obtain the approximate expressions of the critical stress values and mode numbers from linear bifurcation analysis and obtain the approximate analytical post-buckling solutions by using the method of multiple scales.We find both supercritical and subcritical bifurcations may occur depending on the material constants, slenderness ratio of the slab and bifurcation modes. The analytical post-buckling solutions are compared with the numerical solutions of the model equations and good agreements are found.
机译:在本文中,我们在两个横向表面上的轴向压缩力和分布力下的可压缩超弹性板的屈曲和后屈曲。组合的串联渐近扩展方法用于获得简化的模型方程。我们进一步假设横向载荷均匀分布并且是恒定的。我们讨论三种情况:(i)轴向压缩优势,(ii)横向压缩优势和(iii)均匀的压缩。在情况(i)时,横向应力作为常数给出,并且当不施加轴向应力时,不会发生屈曲分叉。在这种情况下,横向应力可以是压缩或拉伸应力。在情况(ii)的情况下,当不施加横向压缩应力时,将给出轴向压缩应力作为常数并且不会发生屈曲分叉。在(iii)的情况下,在两个横向边界和板的两端均匀地压缩。对于所有三种情况,在两个端部的滑动端条件下,我们通过使用多个秤的方法获得了线性分叉分析的临界应力值和模式数的近似表达式,并通过使用多个秤的方法获得近似分析后屈曲解决方案.WE发现超临界和亚临界分叉可能发生,这取决于材料常数,板坯和分叉模式的细长比。分析后屈曲溶液与模型方程的数值解相比,并找到了良好的协议。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号