EFFECT OF HOLE-FORMING TECHNOLOGY ON THE DESTRUCTION OF MATERIAL DD11 USED TO MANUFACTURE WHEEL DISCS

摘要

This study presents the results of comparative tests concerning the destruction process of specimens made of material DD11, for which different hole-forming technologies (i.e. drilling and piercing) were applied. For the analysis of cross-sectional properties of a specimen in the process of destruction, relative vibrations of the specimen's free end as a function of vibrations of a forcing mechanism (vibration inductor) were selected as the diagnostic signal. The tests were carried out on a test stand on which the destruction process of the material's cross-section was induced by the specimen's inertial force. Based on the conducted testing, it was found that the average value of cycles to damage a specimen with holes made using the drilling technique were more durable than the specimens with holes made using the piercing method.