首页> 外文期刊>Smart Materials & Structures >A novel method for bonding state detection of explosive clad structure based on the Hilbert envelop energy ratio of mono-model signals
【24h】

A novel method for bonding state detection of explosive clad structure based on the Hilbert envelop energy ratio of mono-model signals

机译:基于单模型信号的Hilbert包络能比粘接爆炸层结构的粘接状态检测的新方法

获取原文
获取原文并翻译 | 示例
           

摘要

It is significant to perform bonding state detection of explosive clad structure to avoid serious accidents. Due to the complexity of its bonding interface, constructing the detection index which is sensitive to the change of the bonding state has turned into a challenging task. Therefore, a novel method based on the Hilbert envelop energy ratio of mono-model signals is proposed for this task. Benefiting from the advantage of only related with intrinsic property parameters such as damping ratios, natural frequencies and principal modes; the Hilbert envelope energy ratio of arbitrary two order model signals from impulse vibration response can reflect the inherent property of the multi-degree-of-freedom (MDOF) system. In addition, it has been found that the bonding state of explosive clad structure is mainly related with the structural damping ratio. Introduce the general characteristic of MDOF system into explosive clad structure, the detection index based on the Hilbert envelope energy ratio of mono-model signals is constructed for the bonding state detection of explosive clad structure. The proposed method is applied to the bonding state detection of explosive clad pipes to validate its robustness and effectiveness. Compared with the detection method based on optimized dual-tree complex wavelet transform (ODTCWT) and time entropy index proposed by the authors in previous research, the results indicate that the robustness and effectiveness of the proposed method in this paper is more superior to that of the detection method based on ODTCWT and time entropy index.
机译:执行爆炸性包覆结构的粘合状态检测是很重要的,以避免严重的事故。由于其粘接界面的复杂性,构建对粘合状态的变化敏感的检测指标已经变成了一个具有挑战性的任务。因此,提出了一种基于单模型信号的Hilbert包孔能比的新方法为此任务。受益于仅与内在属性参数相关的优势,例如阻尼比率,自然频率和主要模式;来自脉冲振动响应的任意两个阶模型信号的Hilbert包络能量比可以反映多程度自由度(MDOF)系统的固有特性。另外,已经发现,爆炸性包层结构的键合状态主要与结构阻尼比率有关。将MDOF系统的一般特征引入爆炸层结构中,基于单模型信号的Hilbert包络能比的检测指数构造用于爆炸层结构的粘接状态检测。该提出的方法应用于炸药包层的键合状态检测,以验证其鲁棒性和有效性。与基于优化的双树复杂小波变换(ODTCWT)和作者提出的时间熵指数的检测方法相比,结果表明,本文中所提出的方法的鲁棒性和有效性更优于基于ODTCWT和时间熵索引的检测方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号