首页> 外文期刊>Smart Materials & Structures >A steerable miniature legged robot based on piezoelectric bending actuators
【24h】

A steerable miniature legged robot based on piezoelectric bending actuators

机译:基于压电弯曲致动器的可操纵微型腿机器人

获取原文
获取原文并翻译 | 示例
       

摘要

Micro robots, due to their light weight, small size and high mobility, can explore narrow space or hazardous locations that humans or larger robots cannot reach. Consequently, both academia and industry are concerned with the development of advanced microrobots. In this paper, we design a steerable miniature legged robot (SMLR) which possesses light weight and controllable linear/steerable motion by using two piezoelectric bending actuators. Its dimensions are 35 mm x 30 mm x 9 mm (length x width x height) and mass is 9 g. User can modulate the speed, turning radius, and load capacity of the robot by simply tuning the driving voltage. The robot exhibits a speed of 330 mm s(-1) and a turning radius of 102 mm upon a driving voltage of 200 V and a frequency of 8.67 kHz. Moreover, it is capable of driving a 55 g embedded mass at a speed of 20 mm s(-1) under a voltage of 200 V, and its simple design is ideal for down-sizing. Further, we establish a series of open-loop control programs in a virtual instrument through LabVIEW to accurately control the behavior of the SMLR (the location error is less than 5 mm), demonstrating its great potential in practical applications such as movement in a narrow space.
机译:微机器人,由于它们的重量轻,小尺寸和高流动性,可以探索人类或更大机器人无法达到的狭窄空间或危险地点。因此,学术界和工业均关注先进微米的发展。在本文中,我们设计了一种可转向微型腿机器人(SMLR),其通过使用两个压电弯曲致动器来具有重量轻和可控的线性/可转向运动。其尺寸为35mm x 30 mm x 9 mm(长度x宽度x高)和质量为9 g。用户可以通过简单地调整驱动电压来调制机器人的速度,转动半径和负载容量。机器人在200V的驱动电压和8.67kHz的频率下表现出330mm S(-1)的速度和102mm的转向半径。此外,它能够在200V的电压下以20mm S(-1)的速度驱动55g嵌入式质量,并且其简单的设计是下尺寸的理想选择。此外,我们通过LabVIEW在虚拟仪器中建立一系列开环控制程序,以准确控制SMLR的行为(位置误差小于5毫米),证明其在狭窄的运动等实际应用中的巨大潜力空间。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号