首页> 外文期刊>Aerosol Science and Technology: The Journal of the American Association for Aerosol Research >ATOFMS Characterization of Individual Model Aerosol Particles Used for Exposure Studies
【24h】

ATOFMS Characterization of Individual Model Aerosol Particles Used for Exposure Studies

机译:用于暴露研究的单个模型气溶胶颗粒的ATOFMS表征

获取原文
获取原文并翻译 | 示例
           

摘要

Given growing concerns over the observed relationship between ultrafine particles and adverse human health effects,there is a major need in the community performing human/animal exposure studies for methods that can be used for the generation of high concentrations of ultrafine particles (<100 nm) with controllable compositions.The Palas spark discharge generator (Palas GFG 1000) is commonly used to generate "soot-like" particles for such studies.However,before such methods can be used routinely in the lab,it is important to assess the chemical variability and reproducibility of the ultrafine particles produced using such techniques.The goal of this study involves performing the on-line assessment of the chemical variability of individual ultrafine and fine (50-300 nm) particles produced by a Palas generator.The aerodynamic size and chemical composition of ~(12)C and ~(13)C elemental carbon (EC),composite iron-carbon (Fe-~(12)C),and welding particles were analyzed using aerosol time-of-flight mass spectrome-try,and in general highly reproducible single-particle mass spectra were obtained.When using pure graphite (~(12)C) electrodes,EC particles were produced with sizes peaking in the ultrafine mode and 96% of the mass spectra containing distinct C_n~+(n=1-3) envelopes at m/z 12,24,and 36.In contrast,the size mode of the particles generated from isotopically labeled ~(13)C graphite electrodes peaked in the accumulation mode,with 73% of the particles producing EC carbon ion cluster patterns at m/z 13 (~(13)C+),26(~(13)C_2~-),and 39 (~(13)C_3~+),with additional organic carbon species at m/z 15 (CH_3~+),27 (C_2H_3~+/CHN~+),43 (C_3H_7~+/CH_3CO~+),m/z 58 (C_3H_8N~+),and 86 (C_5H_(12)N~+).Observed differences between the ~(12)C and ~(13)C particle spectra are most likely due to their different surface properties,with ~(13)C particles more effectively adsorbing semivolatile organic species originating in the particle-free dilution air.Homogeneous metal particles were also generated from Fe-~(12)C and welding rods with almost all (92 % and 97 %,respectively) of the spectra showing reproducible Fe/Mn/Cr and Fe/~(12)C ion ratios.
机译:越来越多的人开始关注观察到的超细颗粒与不良的人类健康影响之间的关系,因此在社区中进行人类/动物暴露研究的主要需求是需要使用可产生高浓度超细颗粒(<100 nm)的方法Palas火花放电发生器(Palas GFG 1000)通常用于产生“烟灰状”颗粒用于此类研究。但是,在实验室中常规使用此类方法之前,评估化学变异性很重要这项研究的目标涉及对Palas发生器产生的单个超细和细颗粒(50-300 nm)的化学变异性进行在线评估。利用气溶胶时间分析法分析了〜(12)C和〜(13)C元素碳(EC)的组成,铁-碳(Fe-〜(12)C)和焊接颗粒飞行质谱,并且通常获得高度可重现的单粒子质谱图。当使用纯石墨(〜(12)C)电极时,会产生尺寸达到超细模式且质量占96%峰值的EC粒子光谱在m / z 12,24和36处包含明显的C_n〜+(n = 1-3)包络线。相反,同位素标记的〜(13)C石墨电极生成的粒子的尺寸模式在累积模式下达到峰值,其中73%的颗粒在m / z 13(〜(13)C +),26(〜(13)C_2〜-)和39(〜(13)C_3〜+)时产生EC碳离子簇图, m / z 15(CH_3〜+),27(C_2H_3〜+ / CHN〜+),43(C_3H_7〜+ / CH_3CO〜+),m / z 58(C_3H_8N〜+)和86( C_5H_(12)N〜+)。〜(12)C和〜(13)C粒子光谱之间观察到的差异最可能是由于它们的表面性质不同,〜(13)C粒子更有效地吸附了源自半挥发性有机物在无颗粒的稀释空气中。由Fe-〜(12)C和焊条产生,几乎所有光谱(分别为92%和97%)显示可再现的Fe / Mn / Cr和Fe /〜(12)C离子比率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号