首页> 外文期刊>Metallurgical Research & Technology >Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching
【24h】

Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching

机译:含铬钒渣中的钒和铬的顺序提取

获取原文
获取原文并翻译 | 示例
           

摘要

The sequential extraction of vanadium and chromium from the chromium-bearing vanadium slag through two-stage soda roasting-water leaching was proposed. The precipitation order and thermodynamic stability of Cr-spinel and V-spinel were thoroughly calculated with FactSage 6.3 software. The mechanism of the sequential extraction process is further determined by X-ray diffraction (XRD). Thermodynamic calculations show that the precipitation order of main phases in the chromium-bearing vanadium slag is as follows: Cr-spinel - V-spinel - Fe-olivine, while the priority of the reaction between main phases with Na2CO3 follows the order of Fe-olivine - V-spinel - Cr-spinel. XRD results reveal that the vanadium-bearing phase in roasted slag is water-soluble NaVO3, while the chromium-bearing phase in roasted slag is Cr-spinel ((Mn, Fe) Cr2O4) and solid solutions ((Fe0.6Cr0.4)(2)O-3) with the soda amount of 21% and temperature of 800 degrees C. The different evolution route of vanadium-bearing phase and chromium-bearing phase during the roasting process ensures preferential extraction of vanadium from the chromium-bearing vanadium slag. The leaching rates of vanadium and chromium reach 89.36% and 4.91% with optimized experimental conditions. The high leaching rate of vanadium and low leaching rate of chromium show good results of preferential extraction of vanadium from the chromium-bearing vanadium slag..
机译:提出了通过两级苏打焙烧水浸出的含铬钒渣中钒和铬的顺序提取。 Cr-Spinel和V-尖晶石的沉淀顺序和热力学稳定性用Factmage 6.3软件彻底计算。通过X射线衍射(XRD)进一步确定序列提取过程的机制。热力学计算表明,含铬钒渣中的主要阶段的沉淀顺序如下:Cr-spinel - & V-Spinel - & Fe-Olivine,而Na 2 CO 3主要相之间的反应优先遵循Fe-Olivine的顺序 - & V-Spinel - & Cr-spinel。 XRD结果表明,烘焙渣中的钒轴承阶段是水溶性Navo3,而烘焙渣中的铬含量是Cr-spinel((Mn,Fe)Cr2O4)和固体溶液((Fe0.6Cr0.4) (2)O-3)苏打量为21%和温度为800℃。烘焙过程中钒含量相和铬含铬阶段的不同演化路径确保了含铬钒的优先提取钒钒矿渣。钒和铬的浸出率达到89.36%和4.91%,优化的实验条件。钒的高浸出速率和铬的低浸出速率显示出从含铬钒渣的优先提取钒的良好结果..

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号