...
首页> 外文期刊>Experiments in Fluids: Experimental Methods and Their Applications to Fluid Flow >Upstream shear-layer stabilisation via self-oscillating trailing edge flaplets
【24h】

Upstream shear-layer stabilisation via self-oscillating trailing edge flaplets

机译:通过自振荡后缘襟翼的上游剪切层稳定

获取原文
获取原文并翻译 | 示例

摘要

The flow around a symmetric aerofoil (NACA 0012) with an array of flexible flaplets attached to the trailing edge has been investigated at Reynolds numbers of 100,000-150,000 using high-speed time-resolved particle image velocimetry (HS TRPIV) and motion tracking of the flaplets' tips. Particular attention has been made on the upstream effect on the boundary layer evolution along the suction side of the wing, at angles of attack of 0. and 10.. For the plain aerofoil, without flaplets, the boundary layer on the second half of the aerofoil shows the formation of rollers as the shear-layer rolls-up in the fundamental instability mode (linear state). Proper orthogonal decomposition analysis shows that non-linear modes are also present, the most dominant being the pairing of successive rollers. When the flaplets are attached, it is shown that the flow-induced oscillations of the flaplets are able to create a lock-in effect that stabilises the linear state of the shear layer, whilst delaying or damping the growth of non-linear modes. It is hypothesised that the modified trailing edge is beneficial for reducing drag and can reduce aeroacoustic noise production in the lower frequency band, as indicated by an initial acoustic investigation.
机译:使用高速时间分辨粒子图像速度(HS TRPIV)和运动跟踪,在100,000-150,000的Reynolds编号上研究了对称航空膜(Naca 0012)的流动,其具有连接到后缘的柔性翼片阵列。 flaplets的提示。对沿着机翼吸入侧的边界层演变的上游效应进行了特别的注意,在0.和10的角度。对于普通翼型,没有支撑,边界层在下半部分Aerofoil显示辊子的形成作为剪切层卷起在基本不稳定模式(线性状态)中。适当的正交分解分析表明,非线性模式也存在,最大主导是连续滚轮的配对。当附接时,示出了悬架的流动诱导的振荡能够产生锁定剪切层的线性状态,同时延迟或阻尼非线性模式的生长。假设改进的后缘对减少阻力有益,并且可以减少下频带中的流动噪声产生,如初始声学调查所示。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号