...
首页> 外文期刊>International Journal of Mechanical Sciences >Effects of flap on the reentry aerodynamics of a blunt cone in the supersonic flow
【24h】

Effects of flap on the reentry aerodynamics of a blunt cone in the supersonic flow

机译:翻盖对超声波流动钝锥体再入空气动力学的影响

获取原文
获取原文并翻译 | 示例

摘要

Flap over blunt asymmetric reentry vehicles improves the aerodynamic stability and control. The present study has focused on the reentry aerodynamics of blunt-nosed conical body with flap configurations. Three dimensional, steady, viscous and compressible flow over the reentry body configurations were numerically analyzed by solving Reynolds averaged Navier-Stokes equations and SST K-omega. turbulence model. The fundamental governing equations were discretized from the partial differential form to numerical analogue using the finite volume approach. Numerical simulations were carried out to investigate the flow characteristics of the three different reentry body configurations at different pitch angles, flap angles, the Mach numbers, and altitudes. For increment in the pitch angle from 0 degrees to 6 degrees, the axial force coefficient is invariant, while the normal force coefficient linearly increases. It is found that the axial force coefficient is directly proportional to the flap angle and inversely proportional to the Mach number. Presence of flap introduces streamwise vortices and increases the flow complexity after the base to a large extent.
机译:翻盖在钝性不对称再入车辆上提高了空气动力学稳定性和控制。本研究专注于具有襟翼配置的钝鼻锥体的再入空气动力学。通过求解Reynolds平均Navier-Stokes方程和SSTK-Omega,对重新入门体配置的三维,稳定,粘性和可压缩流量进行了数值分析。湍流模型。使用有限体积方法将基本控制方程从部分差异形式离散到数值模拟。进行了数值模拟,以研究不同俯仰角,翼片角,马赫数和高度的三种不同再入体配置的流动特性。为了从0度到6度的俯仰角的增量,轴向力系数是不变的,而正常力系数线性增加。发现轴向力系数与翼片角度成正比,与马赫数成反比。襟翼的存在引入了流动涡流,并在很大程度上增加了基地之后的流动复杂性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号