Mechanics analysis of aluminum alloy cylindrical cup during warm sheet hydromechanical deep drawing

摘要

To obtain the stress states of the sheet metal and understand the potential forming mechanism under the influences of fluid pressure and temperature during the warm hydroforming of 5A06-O aluminum alloy sheets, mechanics analysis was conducted for the warm hydromechanical deep drawing of a cylindrical cup, taking into account through-thickness normal stress induced by fluid pressure. By considering the additional stress during bending using a variable-stiffness pure bending model as equal to that determined using a bending moment model, the additional stress at the die corner during bending was solved. The force equilibrium equations for the cup near the die corner, which were classified by whether the blank contacted the die, were also established and the results were in good agreement with those obtained via the finite element method. Furthermore, mechanics analysis was also performed for the straight-wall region, and the results revealed that the error was slightly greater when the liquid pressure was used to approximately equal to through-thickness normal stress because the ratio of thickness to radius was not sufficiently large.