...
首页> 外文期刊>Boundary-layer Meteorology >Comparison of an Analytical Urban Puff-Dispersion Model with Tracer Observations From the Joint Urban 2003 Field Campaign
【24h】

Comparison of an Analytical Urban Puff-Dispersion Model with Tracer Observations From the Joint Urban 2003 Field Campaign

机译:2003年城镇野外活动与跟踪观测分析城市泛散散型模型的比较

获取原文
获取原文并翻译 | 示例
           

摘要

Puffs of SF6 tracer gas were released at street level in a built-up urban centre (Oklahoma City) during the Joint Urban 2003 (JU2003) field experiment. Although the continuous (20-min) releases during JU2003 have received much attention, the instantaneous puff releases have seldom been studied. Ten real-time SF6 samplers (with 0.5-s resolution) produced useful concentration observations at downwind distances, x, from approximately 100 to 1000m during 36 puff releases over ten days (each day is a numbered intensive operating period). Here we address the maximum 0.5-s concentration, C-max, for each sampler and puff; the dosage for each sampler and puff; and the maximum concentration over all samplers for each puff. We propose, as an urban dispersion model, a simple analytical Gaussian puff formulation, with the dispersion parameter, sigma, assumed equal for all three components. The formulation, sigma=sigma(o)+sigma(turb), is used, where sigma(o) represents the initial mixing (30m) due to local obstructions, and sigma(turb) is the turbulent dispersion component (0.17x). The model is best used for distances beyond the first row or two of buildings. The simple urban puff model is able to predict C-max and dosage with low relative mean bias (less than about 30%) but with a scatter of about a factor of two. This simple urban puff model is part of a comprehensive urban dispersion model comparison using the JU2003 puff data and is intended to provide a baseline against which more detailed models can demonstrate statistically significant improvements.
机译:在2003年联合市区(JU2003)田间实验中,SF6示踪气体在街道上释放了SF6示踪气体的浮气。虽然Ju2003期间的连续(20分钟)释放受到了很多关注,但瞬间泡沫释放很少已经研究过。十个实时SF6采样器(具有0.5秒)在向下时距离x的下行距离x时产生有用的浓度观察,从大约1000米到10天超过十天(每天是一个密集的运行期)。在这里,我们解决了每个采样器和泡芙的最大0.5秒的浓度C-Max;每种采样器和泡芙的剂量;每个泡沫的所有取样器上的最大集中度最大。我们提出,作为城市分散模型,一种简单的分析高斯粉扑配方,具有分散参数Sigma,假设所有三个组件都相等。使用制剂Sigma = Sigma(O)+Σ(互联),其中Sigma(O)表示由于局部障碍物引起的初始混合(30m),并且Sigma(涡轮)是湍流分散组分(0.17x)。该模型最适合用于超出第一行或两个建筑物的距离。简单的城市浮夸模型能够预测具有低相对平均偏差的C-MAX和剂量(小于约30%),但散射大约两倍。这种简单的城市浮福模型是使用JU2003普夫数据进行全面城市色散模型比较的一部分,旨在提供基线,更详细的模型可以展示统计上显着的改进。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号