首页> 外文期刊>材料 >Influence of thermal aging and notch on low-cycle fatigue strength o forged mod.9Cr-1Mo steel at elevated temperature
【24h】

Influence of thermal aging and notch on low-cycle fatigue strength o forged mod.9Cr-1Mo steel at elevated temperature

机译:热老化和缺口对高温锻造MOD.9CR-1MO钢的低循环疲劳强度的影响

获取原文
获取原文并翻译 | 示例
           

摘要

In this study, the influence of thermal aging and notch on low-cycle fatigue strength of forged mod. 9Cr-1Mo steel was investigated at elevated temperature. Total strain-controlled low-cycle fatigue tests using the smooth specimen andload-controlled low-cycle fatigue tests using the notched specimen were carried out at 873K in air. The triangular, tension-hold and compression-hold trapezoidal waveforms were applied to the specimens in a series of the tests. From the experimentalresults, there is no effect of the thermal aging on strain-controlled low-cycle fatigue life using the smooth specimen with each strain waveform. However, low-cycle fatigue life of the notched specimen decreased by thermal aging under load-controlledcondition with triangular and tension-hold trapezoidal waveform.
机译:在这项研究中,热老化和缺口对锻造MOD的低循环疲劳强度的影响。 在升高的温度下研究了9CR-1MO钢。 使用缺口样品的使用光滑样品和负载控制的低周期疲劳试验的总应变控制的低周期疲劳试验在873K的空气中进行。 将三角形,张紧保持和压缩保持梯形波形施用于试样上的试样。 从实验结果中,热老化在使用具有每个应变波形的平滑样品的应变控制的低循环疲劳寿命没有影响。 然而,在具有三角形和张紧保持梯形波形的负载控制监控器下,通过热老化降低了凹痕试样的低周疲劳寿命。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号