首页> 外文期刊>Journal of Materials Science >In situ observation and phase-field simulation on the influence of pressure rate on dendritic growth kinetics in the solidification of succinonitrile
【24h】

In situ observation and phase-field simulation on the influence of pressure rate on dendritic growth kinetics in the solidification of succinonitrile

机译:原位观察与相现场模拟对琥珀腈凝固性树枝状生长动力学的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The influence of pressure rate on dendritic growth kinetics in solidification of succinonitrile was studied via in situ observation based on a novel apparatus established in our previous work and using phase-field modeling where a pressure term associated with pressure rate was introduced. The experimental and simulation results revealed that dendrites grew much faster at higher pressure rate, resulting in dendrites characterized by more developed secondary arms and larger secondary dendrite arm spacing (SDAS), while dendrites growing at lower pressure rate was more cellular-like with small secondary arms. Higher pressure rate facilitated the competitive growth of dendrites, which led to fewer but larger dominate primary dendrites and larger primary dendrite arm spacing (PDAS) in the final microstructure. The cellular-to-dendrite transition (CDT) was more advanced at higher pressure rate, and it was demonstrated that it was the higher pressure rate not the high value of pressure that motivated CDT, via elevating effective undercooling and thus growth velocity at CDT moment. Furthermore, the growth kinetics was analyzed quantitatively, and the variation of tip velocity at different pressure rates was consistent with that of the corresponding undercooling induced by pressure and thermal condition. Moreover, the slope of growth and re-melting velocitythe tip accelerationincreased with pressure-rising rate and pressure-declining rate, respectively, even in a complicated periodic pattern, which was qualitatively consistent with the theoretical relationship of tip acceleration and pressure rate.
机译:基于我们之前的工作中建立的新装置,通过原位观察研究了琥珀腈凝固中树枝状生长动力学对琥珀腈凝固的影响,并采用了介绍了与压力率相关的压力术语的相位场建模。实验和仿真结果表明,树突在较高的压力速率下增长得多,导致树枝状物,其特征在于更开发的次级臂和较大的次级树枝状臂间距(SDA),而在较低压力速率下生长的树枝状物质与小次级更高武器。较高的压力速率促进了树枝状的竞争力,这导致了最终微观结构中的较少但大的主末端树突和较大的初级枝晶臂间距(PDA)。细胞对枝晶转变(CDT)以更高的压力速率更进一步,并且证明它是较高的压力速率,而不是激发CDT的高压,通过升高有效的过冷,从而在CDT时刻的生长速度。此外,定量分析生长动力学,并且不同压力速率下的尖端速度的变化与压力和热条件诱导的相应过冷的变化一致。此外,即使以复杂的周期性图案分别以复杂的周期性图案分别以压力上升率和压力下降速率,生长和重新熔化速度的斜率分别与压力上升率和压力下降的速度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号