首页> 外文期刊>The Journal of Chemical Physics >Molecular dynamics investigation of surface roughness scale effect on interfacial thermal conductance at solid-liquid interfaces
【24h】

Molecular dynamics investigation of surface roughness scale effect on interfacial thermal conductance at solid-liquid interfaces

机译:实体粗糙度施加对固液界面界面热传导的分子动力学研究

获取原文
获取原文并翻译 | 示例
           

摘要

Non-equilibrium molecular dynamics simulations were conducted for solid-liquid-solid systems with nanometer scale grooved surfaces and an induced heat flux for a wide range of topology and solid-liquid interaction conditions to investigate the mechanism of solid-liquid heat transfer, which is the first work of such extensive detail done about the nanoscale roughness effect on heat transfer properties. Single-atom molecules were used for liquid, and the solid-liquid interaction was varied from superhydrophobic to superhydrophilic, while the groove scale was varied from single atom to several nanometers, while keeping the surface area twice that of a flat surface. Both Wenzel and Cassie wetting regimes with a clear transition point were observed due to the capillary effect inside larger grooves that were more than 5 liquid molecule diameters, while such transition was not observed at smaller scales. At the hydrophobic state, large scale grooves had lower interfacial thermal conductance (ITC) due to the Cassie regime, i.e., having unfilled grooves, while at the hydrophilic state, grooved surfaces had ITC about twice that of a flat surface, indicating an extended heat transfer surface effect regardless of the groove scale. At the superhydrophilic state, crystallization of liquid at the surface occurred, and the packing of liquid molecules had a substantial effect on ITC regardless of the groove scale. Finally, both potential energy of solid-liquid interaction and work of solid-liquid adhesion were calculated and were shown to be in similar relations to ITC for all groove scales, except for the smallest single-atom scale grooves, due to a different heat transfer mechanism. (C) 2019 Author(s).
机译:对具有纳米槽沟槽表面的固体固体系统进行非平衡分子动力学模拟,以及用于各种拓扑和固液相互作用条件的诱导热通量,以研究固液热转印的机理关于纳米级粗糙度对传热性能的影响进行了如此广泛的细节的第一作。单个原子分子用于液体,并且固液相互作用从超细纤维素变化到超级水中,而沟槽尺度从单个原子变化到几纳米,同时保持表面积的平坦表面的两倍。由于大于5个液体分子直径的较大槽内的毛细血管效应,观察到具有透明过渡点的温革和Cassie润湿制度,而在较小的尺度下未观察到这种转变。在疏水状态下,由于卡西的状态,大规模槽具有较低的界面热敏电导(ITC),即具有未填充的凹槽,而在亲水状态下,带槽表面具有大约两倍的平坦表面的两倍,表明延长的热量转移表面效果,无论沟槽秤如何。在超顺性状态下,发生表面的液体结晶,并且液体分子的包装对ITC具有显着的影响,而不管沟槽尺度如何。最后,计算了固体液体相互作用的势能和固体粘连的工作,并且由于不同的传热而导致最小的单原子刻度凹槽除了最小的单原子刻度凹槽外,均有与ITC的关系。机制。 (c)2019年作者。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号