【24h】

A systematic study of atmospheric pressure chemical vapor deposition growth of large-area monolayer graphene

机译:大面积单层石墨烯常压化学气相沉积生长的系统研究

获取原文
获取原文并翻译 | 示例
           

摘要

Graphene has attracted considerable interest as a potential material for future electronics. Although mechanical peel is known to produce high quality graphene flakes, practical applications require continuous graphene layers over a large area. The catalyst-assisted chemical vapor deposition (CVD) is a promising synthetic method to deliver wafer-sized graphene. Here we present a systematic study on the nucleation and growth of crystallized graphene domains in an atmospheric pressure chemical vapor deposition (APCVD) process. Parametric studies show that the mean size of the graphene domains increases with increasing growth temperature and CH4 partial pressure, while the density of domains decreases with increasing growth temperature and is independent of the CH4 partial pressure. Our studies show that nucleation of graphene domains on copper substrate is highly dependent on the initial annealing temperature. A two-step synthetic process with higher initial annealing temperature but lower growth temperature is developed to reduce domain density and achieve high quality full-surface coverage of monolayer graphene films. Electrical transport measurements demonstrate that the resulting graphene exhibits a high carrier mobility of up to 3000 cm~2 V~(-1) s~(-1)at room temperature.
机译:石墨烯作为未来电子学的潜在材料已经引起了人们的极大兴趣。尽管众所周知,机械剥离可产生高质量的石墨烯薄片,但实际应用需要在大面积上连续的石墨烯层。催化剂辅助化学气相沉积(CVD)是一种有前途的合成方法,可用于输送晶圆尺寸的石墨烯。在这里,我们介绍了在大气压化学气相沉积(APCVD)过程中结晶石墨烯域的成核和生长的系统研究。参数研究表明,石墨烯畴的平均尺寸随生长温度和CH4分压的增加而增加,而畴密度随生长温度的升高而减小,并且与CH4分压无关。我们的研究表明,铜基底上石墨烯域的成核高度依赖于初始退火温度。开发了具有较高初始退火温度但较低生长温度的两步合成工艺,以降低畴密度并实现单层石墨烯薄膜的高质量全表面覆盖。电迁移测量表明,所得到的石墨烯在室温下具有高达3000 cm〜2 V〜(-1)s〜(-1)的高载流子迁移率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号