Mechanical behavior of α-Al_2O_3-coated SiC particle reinforced nickel matrix composites

摘要

The influence of particle reinforcement on the mechanical behavior of nickel matrix composites with heat treatment at 600 °C was studied. The Ni/SiC composite, with SiC particles coated with sol-gel α-Al_2O_3 was fabricated by electrodeposition. Through the material design of the introduction of the oα-Al_2O_3 coat ings, the coated SiC particles still remain in the composite without reacting with nickel, so that the true effect of SiC particles on the mechanical behavior of the nickel matrix composite with heat treatment can be revealed. The result showed that the presence of coated SiC particles enhanced strength by inhibiting grain growth, while simultaneously interacting with dislocations. The yield strength of 338 MPa was achieved in the composite, increased by more than six times compared to pure nickel. Furthermore, the fracture mechanisms were discussed. Cracking of the coated SiC particles was observed in the com posite, resulting in load transfer strengthening.