...
首页> 外文期刊>Surface & Coatings Technology >Anti-oxidation properties of a BN/SiC/Si3N4-ZrO2-SiO2 multilayer coating for carbon/carbon composites
【24h】

Anti-oxidation properties of a BN/SiC/Si3N4-ZrO2-SiO2 multilayer coating for carbon/carbon composites

机译:用于碳/碳复合材料的BN / SiC / Si3N4-ZrO2-SiO2多层涂层的抗氧化性能

获取原文
获取原文并翻译 | 示例
           

摘要

To improve the oxidation behavior of carbon/carbon composites, we developed a multilayer coating system by pack cementation and sol-gel slurry method. The coating consists of a BN-SiC inner dual-layer and a Si3N4-ZrO2-SiO2 outer barrier layer. The coating can effectively protect the C/C composites from oxidizing below 1500 degrees C. Thermogravimetric analysis shows that the weight loss of the composites is less than 2.40 wt.% after oxidizing at 1400 degrees C for 220 h. The whole temperature range oxidation resistance can be attributed to the multilayer protection design. The BN-SiC inner dual-layer can cure the cracks by producing borosilicate glass, and the Si3N4-ZrO2-SiO2 outer barrier layer can prevent the formation of cracks and seal the bubbles. The oxidation kinetics of the coated carbon/carbon composites shows that the Arrhenius curve consists of four parts, corresponding to four different oxidation processes and mechanisms in different temperature regions. (C) 2015 Published by Elsevier B.V.
机译:为了提高碳/碳复合材料的氧化性能,我们通过填充胶结和溶胶-凝胶浆料法开发了一种多层涂层系统。该涂层由BN-SiC内部双层和Si3N4-ZrO2-SiO2外部阻挡层组成。该涂层可以有效地保护C / C复合材料免受低于1500摄氏度的氧化。热重分析表明,在1400摄氏度氧化220 h后,复合材料的重量损失小于2.40 wt。%。整个温度范围内的抗氧化性可归因于多层保护设计。 BN-SiC内双层可以通过生产硼硅酸盐玻璃来固化裂纹,而Si3N4-ZrO2-SiO2外阻挡层可以防止裂纹的形成并密封气泡。涂层碳/碳复合材料的氧化动力学表明,阿累尼乌斯曲线由四个部分组成,分别对应于在不同温度区域的四个不同的氧化过程和机理。 (C)2015由Elsevier B.V.发布

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号