首页> 外文期刊>The Journal of Chemical Physics >Does the emulsification procedure influence freezing and thawing of aqueous droplets?
【24h】

Does the emulsification procedure influence freezing and thawing of aqueous droplets?

机译:乳化程序会影响水滴的冻结和解冻吗?

获取原文
获取原文并翻译 | 示例
           

摘要

Here we investigate the freezing and thawing properties of aqueous solutions in oil emulsions, with a particular focus on investigating the influence of the oil and surfactant and the stirring time of the emulsion. Specifically, we employ optical cryomicroscopy in combination with differential scanning calorimetry to study the phase behavior of emulsified 25 wt. % ammonium sulfate droplets in the temperature range down to 93 K. We conclude that the nucleation temperature does not vary with oil-surfactant combination, that is, homogeneous nucleation is probed. However, incomplete emulsification and non-unimodal size distribution of dispersed droplets very often result in heterogeneous nucleation. This in turn affects the distribution of freeze-concentrated solution and the concentration of the solid ice/ammonium sulfate mixture and, thus, the phase behavior at sub-freezing temperatures. For instance, the formation of letovicite at 183 K critically depends on whether the droplets have frozen heterogeneously or homogeneously. Hence, the emulsification technique can be a very strong technique, but it must be ensured that emulsification is complete, i.e., a unimodal size distribution of droplets near 15 mu m has been reached. Furthermore, phase separation within the matrix itself or uptake of water from the air may impede the experiments. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
机译:在这里,我们研究了油乳液中水溶液的冷冻和解冻特性,特别着重于研究油和表面活性剂的影响以及乳液的搅拌时间。具体来说,我们采用光学低温显微镜结合差示扫描量热法研究了25 wt。%乳化的相行为。 %的硫酸铵液滴在低至93 K的温度范围内。我们得出的结论是,成核温度不随油-表面活性剂的组合而变化,即探明了均匀成核。但是,分散液滴的不完全乳化和非单峰尺寸分布通常会导致异相成核。反过来,这会影响冷冻浓缩溶液的分布以及固态冰/硫酸铵混合物的浓度,进而影响亚冰点温度下的相态。例如,在183 K上形成白云岩的关键在于液滴是异质冻结还是均质冻结。因此,乳化技术可以是非常强大的技术,但是必须确保乳化完成,即,已经达到15μm附近的液滴的单峰尺寸分布。此外,基质本身的相分离或空气中水分的吸收可能会阻碍实验。 (C)2016作者。除另有说明外,所有文章内容均根据知识共享署名(CC BY)许可(http://creativecommons.org/licenses/by/4.0/)进行许可。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号