...
【24h】

A proposal of T-structure fiber-optic refractive index sensor based on surface plasmon resonance

机译:基于表面等离子体激元共振的T结构光纤折射率传感器的建议

获取原文
获取原文并翻译 | 示例

摘要

We present a compact and novel "T" structure optical fiber refractive index sensor proposal based on surface plasmon resonance. "T" structure sensing head consists of a single mode fiber (SMF) with a plasmonic facet and a cladding partly removed single mode fiber (CPR-SMF) with a gap. The gold film is deposited on the end of SMF instead of the side of the CPR-SMF. The simulation results show that the SPR based on the "T" structure can be excited effectively. The SPR transmission spectrum shifts towards longer wavelength with the sensing sample refractive index increasing largely. When we divide the refractive index range of the sensing sample to two parts, the linear relationships between the SPR wavelength and the refractive index can be used. The resolutions can be highly up to 7.115 x 10(-6) RIU and 3.525 x 10(-6) RIU for the refractive index ranges of 1.3333-1.36 and 1.37-1.4, respectively. The proposed "T" structure sensor works well for achieving the refractive index measurement with high sensitivity and wide range for samples with a tiny amount. (C) 2016 Elsevier B.V. All rights reserved.
机译:我们提出了一种基于表面等离振子共振的紧凑而新颖的“ T”型结构光纤折射率传感器建议。 “ T”型结构感测头由具有等离子面的单模光纤(SMF)和带有间隙的包层部分去除的单模光纤(CPR-SMF)组成。金膜沉积在SMF的末端而不是CPR-SMF的侧面。仿真结果表明,可以有效地激发基于“ T”结构的SPR。随着感测样品的折射率大大增加,SPR透射光谱向更长的波长偏移。当我们将感测样品的折射率范围分为两部分时,可以使用SPR波长和折射率之间的线性关系。对于1.3333-1.36和1.37-1.4的折射率范围,分辨率可以分别高达7.115 x 10(-6)RIU和3.525 x 10(-6)RIU。所提出的“ T”型结构传感器可以很好地实现高灵敏度和宽范围的折射率测量,适用于微量样品。 (C)2016 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号