首页> 外文期刊>Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter >Dynamic and static gain characteristics of quantum-dot semiconductor optical amplifiers operating at 1.55 μm
【24h】

Dynamic and static gain characteristics of quantum-dot semiconductor optical amplifiers operating at 1.55 μm

机译:工作于1.55μm的量子点半导体光放大器的动态和静态增益特性

获取原文
获取原文并翻译 | 示例
           

摘要

We investigate the dynamic and static gain characteristics of quantum-dot semiconductor optical amplifiers (QD-SOAs) operating at 1.55 μm based upon the experimental measurements performed on an InAs/InGaAsP/InP QD-SOA and simple modeling tools. A two-level rate equation model proved to be sufficient to explain the experimental gain dynamics as a function of current. The simple model allowed the derivation of the saturation power of QD-SOAs in the static regime. We show that the saturation power of QD-SOAs, in contrast to bulk and quantum well amplifiers, is enhanced by a factor of roughly two that depends on the material and device parameters. Our modeling tools are based on the experimentally obtained quantities and facilitates the analysis of different devices' designs and the identification of the parameters that play a key role in the fast QD-SOA gain recovery and its high saturation output power, namely, a fast capture time of carriers into the dot and a large energy difference between wetting layer and quantum dot states.
机译:我们基于在InAs / InGaAsP / InP QD-SOA上进行的实验测量和简单的建模工具,研究了工作在1.55μm的量子点半导体光放大器(QD-SOA)的动态和静态增益特性。事实证明,两级速率方程模型足以说明实验增益动态特性与电流的关系。简单的模型允许推导静态状态下QD-SOA的饱和功率。我们表明,与体阱和量子阱放大器相比,QD-SOA的饱和功率提高了大约两倍,这取决于材料和器件参数。我们的建模工具基于实验获得的数量,有助于分析不同设备的设计并确定参数,这些参数在快速QD-SOA增益恢复及其高饱和输出功率(即快速捕获)中起着关键作用载流子进入点的时间以及润湿层和量子点状态之间的能量差异很大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号