【24h】

Retina imaging system with adaptive optics for the eye with or without myopia

机译:具有或不具有近视眼的带有自适应光学器件的视网膜成像系统

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

An adaptive optics system for the retina imaging is introduced in the paper. It can be applied to the eye with myopia from 0 to 6 diopters without any adjustment of the system. A high-resolution liquid crystal on silicon (LCOS) device is used as the wave-front corrector. The aberration is detected by a Shack-Harmann wave-front sensor (HASO) that has a Root Mean Square (RMS) measurement accuracy of lambda/100 (lambda velence 0.633 (mu)m). And an equivalent scale model eye is constructed with a short focal length lens (approx18 mm) and a diffuse reflection object (paper screen) as the retina. By changing the distance between the paper screen and the lens, we simulate the eye with larger diopters than 5 and the depth of field. The RMS value both before and after correction is obtained by the wave-front sensor. After correction, the system reaches the diffraction-limited resolution approximately 230 cycles/mm at the object space. It is proved that if the myopia is smaller than 6 diopters and the depth of field is between -40 and +50 mm, the system can correct the aberration very well.
机译:本文介绍了一种用于视网膜成像的自适应光学系统。它可以应用于0至6屈光度的近视眼,而无需对系统进行任何调整。高分辨率硅上液晶(LCOS)器件用作波前校正器。像差通过Shack-Harmann波前传感器(HASO)进行检测,该传感器的均方根(RMS)测量精度为λ/ 100(λvelence 0.633μm)。用短焦距镜头(约18毫米)和一个漫反射物体(纸屏幕)作为视网膜,构成了一个等比例模型眼。通过改变纸屏幕和镜头之间的距离,我们可以模拟屈光度大于5的眼睛和景深。校正前后的RMS值由波前传感器获得。校正后,系统在物空间达到衍射极限分辨率约230个循环/毫米。事实证明,如果近视度数小于6屈光度并且景深在-40至+50 mm之间,则该系统可以很好地校正像差。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号