首页> 外文期刊>Langmuir: The ACS Journal of Surfaces and Colloids >Site-Selective Biofunctionalization of Aluminum Nitride Surfaces Using Patterned Organosilane Self-Assembled Monolayers
【24h】

Site-Selective Biofunctionalization of Aluminum Nitride Surfaces Using Patterned Organosilane Self-Assembled Monolayers

机译:使用图案化有机硅烷自组装单层的氮化铝表面的定点生物功能化。

获取原文
获取原文并翻译 | 示例
           

摘要

Surface biochemical functionalization of group-III nitride semiconductors has recently attracted much interest because of their biocompatibility, nontoxicity, and long-term chemical stability under demanding physiochemical conditions for chemical and biological sensing. Among III-nitrides, aluminum nitride (AlN) and aluminum gallium nitride (AlGaN) are particularly important because they are often used as the sensing surfaces for sensors based on fieldeffect transistor or surface acoustic wave (SAW) sensor structures. To demonstrate the possibility of site-selective biofunctionalization on AlN surfaces, we have fabricated two-dimensional antibody micropatterns on AlN surfaces by using patterned self-assembled monolayer (SAM) templates. Patterned SAM templates are composed of two types of organosilane molecules terminated with different functional groups (amino and methyl), which were fabricated on AlN/sapphire substrates by combining photolithography, lift-off process, and self-assembly technique. Because the patterned SAM templates have different surface properties on the same surface, clear imaging contrast of SAM micropatterns can be observed by field-emission scanning electron microscopy (FE-SEM) operating at a low accelerating voltage in the range of 0.5-1.5 kV. Furthermore, the contrast in surface potential of the binary SAM microstructures was confirmed by selective adsorption of negatively charged colloidal gold nanoparticles (AuNPs). The immobilization of AuNPs was limited on the positively charged amino-terminated regions, while they were scarcely found on the surface regions terminated by methyl groups. In this work, selective immobilization of green fluorescent protein (GFP) antibodies was demonstrated by the specific protein binding of enhanced GFP (EGFP) labeling. The observed strong fluorescent signal from antibody functionalized regions on the SAM-patterned AlN surface indicates the retained biological activity of specific molecular recognition resulting from the antibody-EGFP interaction. The results reported here show that micropatterning of organosilane SAMs by the combination of photolithographic process and lift-off technique is a practical approach for the fabrication of reaction regions on AlN-based bioanalytical microdevices.
机译:III族氮化物半导体的表面生化功能化最近吸引了很多兴趣,因为它们在化学和生物传感的苛刻理化条件下具有生物相容性,无毒性和长期化学稳定性。在III族氮化物中,氮化铝(AlN)和氮化铝镓(AlGaN)特别重要,因为它们经常用作基于场效应晶体管或表面声波(SAW)传感器结构的传感器的感测表面。为了证明在AlN表面上进行位点选择性生物功能化的可能性,我们通过使用带图案的自组装单层(SAM)模板在AlN表面上制作了二维抗体微图案。图案化的SAM模板由两种类型的有机硅烷分子组成,这些分子以不同的官能团(氨基和甲基)封端,它们是通过光刻,剥离工艺和自组装技术在AlN /蓝宝石衬底上制备的。由于图案化的SAM模板在同一表面上具有不同的表面特性,因此可以通过在0.5-1.5 kV范围内的低加速电压下运行的场发射扫描电子显微镜(FE-SEM)观察到SAM微图案的清晰成像对比度。此外,通过选择性吸附带负电的胶体金纳米颗粒(AuNPs),确认了二元SAM微结构的表面电势对比。 AuNPs的固定化仅限于带正电荷的氨基末端区域,而很少在甲基终止的表面区域上发现。在这项工作中,绿色荧光蛋白(GFP)抗体的选择性固定通过增强的GFP(EGFP)标记的特异性蛋白结合得到证明。从SAM图案化的AlN表面上的抗体功能化区域观察到的强荧光信号表明,由于抗体-EGFP相互作用而产生的特定分子识别的保留生物学活性。此处报道的结果表明,通过光刻工艺和剥离技术的组合对有机硅烷SAM进行微图案化是在基于AlN的生物分析微器件上制造反应区的一种实用方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号