首页> 外文期刊>Journal of the Chilean Chemical Society >Morphological and structural features of Co/TiO2 catalysts prepared by different methods and their performance in the liquid phase hydrogenation of alpha,beta unsaturated aldehydes
【24h】

Morphological and structural features of Co/TiO2 catalysts prepared by different methods and their performance in the liquid phase hydrogenation of alpha,beta unsaturated aldehydes

机译:不同方法制备的Co / TiO2催化剂的形态结构特征及其在α,β不饱和醛液相加氢中的性能

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of the preparation method of Co/TiO2 catalysts on the performance in the liquid phase hydrogenation of cinnamaldehyde and crotonaldehyde has been studied. The Co/TiO2 catalysts were prepared by impregnation on titania (TiO2, P-25). sol-gel, and precipitation procedures. Different reduction-oxidation-reduction cycles were carried out in order to detect possible chances in the nature of the phases and their reduction degrees. The catalysts were characterized by specific area measurements, TEM, ED, XPS and TPR/TPO studies. The catalysts prepared by the sol-gel and precipitation method exhibit higher resistance to sintering when they are treated under the same reduction-oxidation-reduction cycles, than the impregnated catalyst. Morphological changes observed by TEM were used to explain the catalytic behavior showed by the catalysts. The presence of Co degrees, CoO and Co3O4 phases in the reduced samples were detected by different methods. XPS results show the existence of small particles of CoO, which are interacting with the support, which are very difficult to reduce. TEM and electron diffraction structural studies show an effect of metal-support interaction by the appearance of channels and pill-box form in the particles. The highest yield in both catalytic hydrogenation reactions were obtained with the Co/TiO2 catalysts prepared by precipitation and sol gel methods. The selectivity was closed to 50 and 30 % for cinnamyl alcohol and crotyl alcohol, respectively.
机译:研究了Co / TiO2催化剂的制备方法对肉桂醛和巴豆醛的液相加氢性能的影响。通过在二氧化钛(TiO2,P-25)上浸渍来制备Co / TiO2催化剂。溶胶-凝胶和沉淀程序。为了检测相的性质及其还原度的可能机会,进行了不同的还原-氧化-还原循环。通过比表面积测量,TEM,ED,XPS和TPR / TPO研究来表征催化剂。通过溶胶-凝胶和沉淀法制备的催化剂在相同的还原-氧化-还原循环下进行处理时,与浸渍的催化剂相比,具有更高的抗烧结性。通过TEM观察到的形态变化用于解释催化剂显示的催化行为。通过不同的方法检测还原样品中Co度,CoO和Co3O4相的存在。 XPS结果表明存在与载体相互作用的CoO小颗粒,很难还原。 TEM和电子衍射结构研究表明,颗粒中存在通道和药丸盒形式,金属与载体之间便会相互作用。用沉淀和溶胶凝胶法制备的Co / TiO2催化剂在两个催化加氢反应中均获得最高收率。对肉桂醇和巴豆醇的选择性分别接近50%和30%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号