...
首页> 外文期刊>Journal of Rheology >Criteria for extensional necking instability in complex fluids and soft solids. Part I: Imposed Hencky strain rate protocol
【24h】

Criteria for extensional necking instability in complex fluids and soft solids. Part I: Imposed Hencky strain rate protocol

机译:复杂流体和软固体中延伸颈缩不稳定性的标准。第一部分:施加的Hencky应变速率协议

获取原文
获取原文并翻译 | 示例
           

摘要

We study theoretically the necking dynamics of a filament of complex fluid or soft solid in uniaxial tensile stretching at constant imposed Hencky strain rate i, by means of linear stability analysis and nonlinear (slender filament) simulations. We demonstrate necking to be an intrinsic flow instability that arises as an inevitable consequence of the constitutive behavior of essentially any material (with a possible rare exception, which we outline), however carefully controlled the experimental conditions. We derive criteria for the onset of necking that are reportable simply in terms of characteristic signatures in the shapes of the experimentally measured rheological response functions, and should therefore apply universally to all materials. As evidence of their generality, we show them to hold numerically in six popular constitutive models: The Oldroyd B, Giesekus, FENE-CR, Rolie-Poly, and Pom-pom models of polymeric fluids, and a fluidity model of soft glassy materials. Two distinct modes of necking instability are predicted. The first is relatively gentle, and sets in when the tensile stress signal first curves downward as a function of the time t (or accumulated strain epsilon = (epsilon) over dott) since the inception of the flow. The second is more violent, and sets in when a carefully defined "elastic derivative" of the tensile force first slopes down as a function of time t (or strain epsilon). In the limit of fast flow (epsilon) over dot tau -> infinity, where tau is the material's characteristic stress relaxation time, this second mode reduces to the Considere criterion for necking in solids. However, we show that the Considere criterion fails to correctly predict the onset of necking in any viscoelastic regime of finite imposed (epsilon) over dott, despite being widely discussed in the complex fluids literature. Finally, we elucidate in detail the way in which these modes of instability manifest themselves in entangled polymeric fluids (linear polymers, wormlike micelles and branched polymers). In particular, we demonstrate four distinct regimes of necking behavior as a function of imposed strain rate, consistent with master curves in the experimental literature. (C) 2016 The Society of Rheology.
机译:我们通过线性稳定性分析和非线性(细长细丝)模拟,从理论上研究了在恒定施加的Hencky应变速率i的情况下,复杂流体或软固体细丝在单轴拉伸中的颈缩动力学。我们证明了颈缩是一种内在的流动不稳定性,它是基本上任何材料的本构行为(不可避免的例外,我们概述)的必然结果,但是却小心地控制了实验条件。我们得出了颈缩开始的标准,这些标准仅是通过实验测量的流变响应函数的形状中的特征标记来报告的,因此应普遍适用于所有材料。作为其通用性的证明,我们证明它们在六个流行的本构模型中具有数值:聚合物流体的Oldroyd B,Giesekus,FENE-CR,Rolie-Poly和Pom-pom模型,以及软玻璃质材料的流动性模型。可以预测两种不同的颈缩不稳定性模式。第一个是相对平缓的,并且在拉应力信号从流动开始以来第一次根据时间t(或累积的应变epsilon =(ε)超过dott)向下弯曲时进入。第二个更剧烈,并在经过严格定义的拉力的“弹性导数”首先作为时间t(或应变ε)的函数下降时进入。在点tau->无穷大的快速流动(ε)的极限中,其中tau是材料的特征应力松弛时间,该第二种模式简化为考虑到固体颈缩的“考虑”标准。但是,尽管复杂流体文献中对此进行了广泛讨论,但我们表明,考虑因素标准无法正确预测在点上施加的任何有限强(ε)粘弹性下的缩颈现象。最后,我们详细阐明了这些不稳定性模式在纠缠的聚合物流体(线性聚合物,蠕虫状胶束和支化聚合物)中表现出来的方式。特别是,我们证明了四种不同的颈缩行为制度,作为施加应变率的函数,与实验文献中的主曲线一致。 (C)2016流变学学会。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号