首页> 外文期刊>Journal of spinal disorders & techniques. >Height restoration and preservation in osteoporotic vertebral compression fractures: A biomechanical analysis of standard balloon kyphoplasty versus radiofrequency kyphoplasty in a cadaveric model
【24h】

Height restoration and preservation in osteoporotic vertebral compression fractures: A biomechanical analysis of standard balloon kyphoplasty versus radiofrequency kyphoplasty in a cadaveric model

机译:骨质疏松椎体压缩性骨折的高度恢复和保留:尸体模型中标准球囊后凸成形术与射频后凸成形术的生物力学分析

获取原文
获取原文并翻译 | 示例
           

摘要

Study Design: Biomechanical cadaver study. Objective: The aim of the present study was to evaluate 2 different methods with respect to height restoration and preservation in a cadaver model under cyclic loading. Summary of Background Data: Standard balloon kyphoplasty (BKP) represents a well-established treatment opportunity for osteoporotic vertebral compression fractures. BKP was developed to restore vertebral height and improve sagittal alignment. Its use has grown significantly over the last 2 decades. In contrast, distinct biomechanical data are missing. Within the last few years, several alternative techniques with regard to height restoration have emerged, such as radiofrequency kyphoplasty (RFK). Methods: Twenty-five vertebral bodies of 2 female cadavers with secured osteoporosis were examined. Standardized vertebral wedge compression fractures were created. Afterward, 2 groups were randomly assigned: 12 vertebral bodies were treated with BKP and 13 vertebral bodies by RFK under a preload of 100 N. Then the vertebral bodies underwent cyclic loading (100,000 cycles, 100 to 600 N, 5 Hz). Anterior, central, and posterior vertebral body heights were evaluated by CT scans. Results: Anterior height was reduced after fracture 6.3 mm (SD 3) for the BKP group and 7.2 mm (SD 3) in the RFK group (P>0.1). After treatment, the difference in the initial anterior height was 4.5 mm (SD 2) for the BKP group and 4.7 mm (SD 3) for the RFK group (P>0.1). After cyclic loading, the difference was 5.3 mm (SD 3) for the BKP group and 5.2 mm (SD 3) for the RFK group (P>0.1). The average cement volume used was 8.7 mL (SD 1) for the BKP group and 4.8 mL (SD 2) for the RFK group (P<0.0001). Conclusions: On the basis of our results, the unipedicular RFK in osteoporotic compression fractures might represent a promising alternative for the clinical setting.
机译:研究设计:生物力学尸体研究。目的:本研究的目的是评估在循环荷载下尸体模型中高度恢复和保存的两种不同方法。背景资料摘要:标准球囊后凸成形术(BKP)代表了公认的骨质疏松性椎体压缩性骨折的治疗机会。 BKP的开发旨在恢复椎骨高度并改善矢状位。在过去的20年中,它的使用已显着增长。相反,缺少独特的生物力学数据。在最近几年中,出现了一些关于高度恢复的替代技术,例如射频后凸成形术(RFK)。方法:检查2具固定骨质疏松症的女性尸体的25个椎体。创建了标准的椎体楔形压缩性骨折。之后,随机分为2组:在100 N的预紧力下,用BKP处理12个椎体,并通过RFK处理13个椎体。然后,对椎体进行循环加载(100,000个循环,100到600 N,5 Hz)。通过CT扫描评估椎体的前,中和后高度。结果:BKP组骨折后前高度降低6.3 mm(SD 3),RFK组骨折前高度降低7.2 mm(SD 3)(P> 0.1)。治疗后,BKP组的初始前高度差为4.5 mm(SD 2),RFK组的初始前高度差为4.7 mm(SD 3)(P> 0.1)。循环加载后,BKP组的差异为5.3 mm(SD 3),RFK组的差异为5.2 mm(SD 3)(P> 0.1)。 BKP组使用的平均水泥量为8.7 mL(SD 1),RFK组使用的平均水泥体积为4.8 mL(SD 2)(P <0.0001)。结论:根据我们的结果,骨质疏松性压缩性骨折的单根RFK可能代表临床前景的一个有前途的选择。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号