首页> 外文期刊>Journal of Polymer Research >Polyethylene/graphite oxide nanocomposites obtained by in situ polymerization using modified graphite oxide-supported metallocene catalysts
【24h】

Polyethylene/graphite oxide nanocomposites obtained by in situ polymerization using modified graphite oxide-supported metallocene catalysts

机译:使用改性氧化石墨负载的茂金属催化剂原位聚合获得的聚乙烯/氧化石墨纳米复合材料

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The nanosheet-shaped polyethylene/graphite oxide (PE/GO) nanocomposites were attained by in situ ethylene polymerization using MAO/Cp _2ZrCl_2 catalyst system supported on the graphite oxides modified with phenylalanine, butylamine, octylamine or 3- aminopropyltriethoxysilane, respectively. The introduction of the organic guests between graphite oxide sheets led to the nanoscale exfoliation and gradual dispersion of GO in the PE matrix during the in situ ethylene polymerization. Morphological examination of the ultimate PE/GO nanocomposites by TEM, SEM, and XRD techniques revealed effective dispersion in nanoscale of GO in PE matrix. In comparison, the traditional phase separated composite was obtained using unmodified GO-supported metallocene catalyst system. The heat endurance of the PE/GO composite is much better than that of polyethylene from homogeneous polymerization.
机译:纳米片状聚乙烯/氧化石墨(PE / GO)纳米复合材料是通过原位乙烯聚合,使用MAO / Cp _2ZrCl_2催化剂体系负载在分别用苯丙氨酸,丁胺,辛胺或3-氨基丙基三乙氧基硅烷改性的石墨氧化物上而制得的。在氧化石墨片之间引入有机客体导致原位乙烯聚合过程中GO在PE基体中发生纳米级剥落和逐渐分散。通过TEM,SEM和XRD技术对最终的PE / GO纳米复合材料进行形态学检查,发现GO纳米在PE基质中有效分散。相比之下,传统的相分离复合材料是使用未改性的GO负载的茂金属催化剂体系获得的。 PE / GO复合材料的耐热性比均相聚合的聚乙烯好得多。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号