【24h】

Amorphous silicon p-i-n on p crystalline silicon photodetector in the visible and near infrared spectrum

机译:p晶体硅光电探测器上可见和近红外光谱中的非晶硅p-i-n

获取原文
获取原文并翻译 | 示例
           

摘要

We present a simple large area device able to discriminate between visible and near infrared (IR) radiations based on heterostructure obtained by growing p-i-n amorphous silicon junction on p-type crystalline silicon wafer. The properties of this stacked structure are those of a back to back diode. When light penetrates through the p amorphous layer and the applied voltage reverse biases the amorphous diode and forward biases the heterostructure diode visible spectrum is detected, whereas in opposite bias condition near infrared spectrum is detected. We measured these devices performing steady state and transient measurements of photocurrent in different conditions of incident light wavelength and bias voltage. An analytical model for the photocurrent is used to optimise the thickness layers. Numerical simulation with a standard simulator with integrated circuit emphasis is performed for steady state and transient measurements. Steady state measurements have shown excellent spectral separation simply by controlling external bias. Transient measurement indicates that the speed of the device in the light component detection is dependent on the speed of the p-i-n diode. (C) 2000 Elsevier Science B.V. All rights reserved. [References: 9]
机译:我们提出了一种简单的大面积器件,该器件能够基于异质结构区分可见光和近红外(IR)辐射,该异质结构是通过在p型晶体硅晶片上生长p-i-n非晶硅结而获得的。这种堆叠结构的特性是背对背二极管的特性。当光穿过p非晶层并且施加的电压反向偏置非晶二极管而正向偏置时,异质结构二极管的可见光谱被检测到,而在相反的偏置条件下,检测到近红外光谱。我们测量了这些器件在不同入射光波长和偏置电压条件下执行稳态和瞬态光电流测量的结果。光电流的分析模型用于优化厚度层。使用具有集成电路重点的标准模拟器进行数值模拟,以进行稳态和瞬态测量。稳态测量仅通过控制外部偏置即可显示出色的光谱分离。瞬态测量表明,在光成分检测中设备的速度取决于p-i-n二极管的速度。 (C)2000 Elsevier Science B.V.保留所有权利。 [参考:9]

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号