...
【24h】

Effect of chitosan membrane surface modification via plasma induced polymerization on the adhesion of osteoblast-like cells

机译:等离子体诱导聚合改性壳聚糖膜表面对成骨样细胞粘附的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The surface of solvent cast chitosan membranes was modified using a two-step procedure. Oxygen plasma treatment was used at the first activation step followed by vinyl monomer graft polymerization. Two monomers were used in order to compare the influence of different functional groups on cell adhesion and proliferation; acrylic acid ( AA) was used to introduce carboxyl groups and vinyl sulfonic acid (VSA) was used as a source of sulfonic groups. The surface chemistry/energy changes were characterized by means of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR-ATR), and contact angle measurements. Additionally, alterations in the surface morphology were investigated by scanning electron microscopy (SEM). XPS analyses confirmed the polymer grafting on the surface; an S-2s peak appears in the VSA survey spectrum and an O-C=O peak emerges in the C-1s high resolution spectrum after AA grafting. Moreover, contact angle measurements showed an increment in the values of the surface energy polar and Lewis base components for all treated samples, confirming the introduction of additional polar groups by the modification processes. FTIR-ATR spectra showed no significant difference between treated and original materials. These results confirmed that only the very top ( a few angstroms) surface layer, but not the bulk of the material, was modified. The effect of modification on the adhesion and proliferation of osteoblast-like cells was studied on a preliminary basis. Direct contact tests were performed using a human osteosarcoma cell line (SaOs-2). Cell morphology ( optical microscopy and SEM) and cell viability (MTS test) were evaluated for untreated and surface modified membranes. The results revealed that both plasma treatment, and the presence of sulfonic groups on the surface of chitosan membranes, improve SaOs-2 adhesion and proliferation when compared to untreated or AA-grafted membranes. This effect was strongly related to the polar and Lewis basic components of the total surface energy.
机译:溶剂流延的壳聚糖膜的表面使用两步程序进行修饰。在第一活化步骤中使用氧等离子体处理,然后进行乙烯基单体接枝聚合。为了比较不同官能团对细胞粘附和增殖的影响,使用了两种单体。丙烯酸(AA)用于引入羧基,乙烯基磺酸(VSA)用作磺酸基的来源。表面化学/能量变化通过X射线光电子能谱(XPS),傅立叶变换红外光谱(FTIR-ATR)和接触角测量来表征。另外,通过扫描电子显微镜(SEM)研究了表面形态的变化。 XPS分析证实了聚合物在表面上的接枝。 AA接枝后,VSA调查谱中出现一个S-2s峰,而C-1s高分辨率谱中出现一个O-C = O峰。此外,接触角测量结果表明,所有处理过的样品的表面能极性和路易斯碱成分的值都有所增加,这证实了通过修饰过程引入了其他极性基团。 FTIR-ATR光谱显示处理后的材料与原始材料之间无显着差异。这些结果证实,只有最顶层(几埃)的表面层,而不是大部分材料被修饰。初步研究了修饰对成骨样细胞粘附和增殖的影响。使用人骨肉瘤细胞系(SaOs-2)进行直接接触测试。对于未处理的膜和表面改性的膜,评估了细胞形态(光学显微镜和SEM)和细胞活力(MTS测试)。结果表明,与未处理或AA接枝的膜相比,等离子体处理和壳聚糖膜表面磺酸基的存在均可改善SaOs-2的粘附和增殖。该效应与总表面能的极性和路易斯基本成分密切相关。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号