...
首页> 外文期刊>Journal of Catalysis >Platinum clusters supported in zeolite LTL: Influence of catalyst morphology on performance in n-hexane reforming
【24h】

Platinum clusters supported in zeolite LTL: Influence of catalyst morphology on performance in n-hexane reforming

机译:沸石LTL中负载的铂簇:催化剂形态对正己烷重整性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

KLTL zeolite-supported platinum catalysts were synthesized from aqueous tetraammineplatinum(II) nitrate solutions and nonacidic KLTL zeolite crystallites, including some with dimensions as little as 300 x 500 Angstrom. The zeolite crystallites had various morphologies, some being predominantly disk-shaped particles and some predominantly mosaics of rod-like domains with a range of c-dimension lengths. The activity and selectivity of each catalyst were evaluated for dehydrocyclization of n-hexane in the presence of H-2 to form predominantly benzene at conversions of typically 45-90%. The data presented here provide a detailed characterization of the deactivation of such catalysts in the absence of sulfur. EXAFS data show that the platinum in each catalyst was present in clusters of about 20 atoms each, on average. Electron micrographs show that the platinum clusters were nearly evenly dispersed on the surfaces of the zeolite crystallites, including the intracrystalline and extracrystalline surfaces. The catalytic performance was virtually independent of the zeolite channel length, but activity, selectivity, and resistance to deactivation were found to be correlated with the ratio of the surface area external to the crystallite domains to that within the intracrystalline pores. The catalyst performance is dependent on this ratio (which is related to the zeolite morphology) as follows: in comparison with the others, the catalysts with the relatively low fractions of platinum outside the intracrystalline pores are more active, more selective for benzene formation, and more resistant to deactivation. One well-prepared catalyst, for example, gave greater than 90% selectivity for benzene and no measurable deactivation over 140 h of operation in a flow reactor at 420 degrees C and atmospheric pressure. These data match those characterizing the most selective catalysts reported. Consistent with the interpretation of E. Iglesia and J. E. Baumgartner tin "New Frontiers in Catalysis" (L. Guczi, E Solymosi, and P. Tetenyi, Eds.), p. 993, Studies in Surface Science and Catalysis, Vol. 75. Elsevier, Amsterdam, 1993), catalyst deactivation is associated with platinum outside the zeolite pores; it is hypothesized that coke formation outside the pores is relatively rapid and that a distinguishing characteristic of the best catalysts is the presence of most of the platinum in the intracrystalline pores, where coke formation may be inhibited by the constraints of the pores. (C) 1998 Academic Press. [References: 30]
机译:KLTL沸石负载的铂催化剂是由硝酸四氨合铂(II)水溶液和非酸性的KLTL沸石微晶合成的,其中包括一些尺寸仅为300 x 500埃的微晶。沸石微晶具有各种形态,其中一些主要是盘状颗粒,而一些主要是具有一定c尺寸长度的棒状畴的镶嵌体。评估每种催化剂的活性和选择性,以研究在H-2存在下正己烷脱氢环化反应,主要形成苯,转化率通常为45-90%。此处提供的数据提供了在不存在硫的情况下此类催化剂失活的详细表征。 EXAFS数据显示,每种催化剂中的铂平均以簇状存在,每簇平均约20个原子。电子显微照片表明,铂簇几乎均匀地分散在沸石微晶的表面上,包括晶内和晶外表面。催化性能实际上与沸石通道长度无关,但是发现活性,选择性和抗失活性与微晶域外部的表面积与晶体内孔内的表面积之比相关。催化剂的性能取决于该比率(与沸石的形态有关),如下所述:与其他比率相比,晶内孔外铂含量相对较低的催化剂更具活性,对苯的形成更具选择性,并且更抗失活。例如,一种制备良好的催化剂在420℃和大气压下在流动反应器中运行140个小时后,苯的选择性超过90%,并且没有可测量的失活。这些数据与表征所报道的最具选择性的催化剂的那些数据相匹配。与E. Iglesia和J. E. Baumgartner tin的“催化新领域”(L. Guczi,E Solymosi和P. Tetenyi,编辑)的解释一致,第3页。 993,表面科学与催化研究,第1卷。 75. Elsevier,阿姆斯特丹,1993年),催化剂失活与沸石孔外的铂有关。据推测,孔外的焦炭形成是相对较快的,并且最好的催化剂的一个显着特征是结晶内孔中存在大多数的铂,其中焦炭的形成可以被孔的约束所抑制。 (C)1998年学术出版社。 [参考:30]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号