Fabricating translucent polydimethylsiloxane (PDMS) super-hydrophobic surface greenly by facile water-dissolved fillers

摘要

In this study, a polydimethylsiloxane (PDMS) colloid was cast onto a template made of recycled polypropylene for structural duplication to fabricate translucent super-hydrophobic surfaces greenly without the use of any complicated method. The surface structure of the template was formed by hot embossing using salt grain fillers dissolved in water. The resulting contact angle (CA) values of fabricated PDMS surfaces were 153.4 +/- 0.6 degrees, 152.3 +/- 1.8 degrees, 152.2 +/- 0.8 degrees, and 152.0 +/- 1.6 degrees and the associated slide angle (SA) values were 5.8 +/- 0.6 degrees, 8.7 +/- 1.5 degrees, 8.6 +/- 1.1 degrees, and 16.3 +/- 1.9 degrees for filler grain size categories A, B, C, and D, respectively. The surfaces with grain sizes A, B, and C exhibited super-hydrophobic conditions, where CA>150 degrees and SA<10 degrees; on the other hand, the surface with grain size D exhibited an SA value greater than 10 degrees. The measured percentages of light transmittance in the visible wavelength range of 400-800nm were 75-80% for grain sizes B, C, and D and 85-90% for grain size A. Furthermore, a green laser light was diffused from a spot of 0.5-7.7cm in diameter; related glare was also eliminated.