Corrosion of the zinc negative electrode of zinc–cerium hybrid redox flow batteries in methanesulfonic acid

摘要

Corrosion of zinc in aqueous methanesulfonic acid has been evaluated over awide range of concentrations of acid (0.5–5 mol dm~(-3)), dissolved zinc (0.5–2 mol dm~(-3)), and electrolyte temperature (22–50 °C). The corrosion rate of zinc, in terms of weight loss and the volume of hydrogen evolved, varied with time and it was found to be highly dependent on the surface state and electrolyte conditions. With an initial active layer of zinc present, the corrosion rate rapidly increased following a decline when the proton concentration in the solution decreased to ca. 0.56 mol dm~(-3). Organic and inorganic inhibitorswere added to the electrolyte to suppress the zinc corrosion in 1 mol dm~(-3) methanesulfonic acid. The strong adsorption and blocking effects of cationic organic adsorption inhibitors, such as cetyltrimethyl ammonium bromide and butyltriphenyl phosphonium chloride, led to a significant decrease in zinc corrosion over a 10 h immersion period. With the addition of indium and lead ions inhibitors, the zinc surface showed less activity. Zinc corrosion continued to a smaller extent in the presence of these metallic inhibitors during the first few hours, but the metallic layer of the inhibitors did not cover the surface completely resulting in continued hydrogen evolution and making the inhibitors less effective at longer times.