首页> 外文期刊>Tribology International >Effects of glass fiber and molybdenum disulfide on tribological behaviors and PV limit of chopped carbon fiber reinforced Polytetrafluoroethylene composites
【24h】

Effects of glass fiber and molybdenum disulfide on tribological behaviors and PV limit of chopped carbon fiber reinforced Polytetrafluoroethylene composites

机译:玻璃纤维和二硫化钼对短切碳纤维增强聚四氟乙烯复合材料的摩擦学行为和PV极限的影响

获取原文
获取原文并翻译 | 示例
       

摘要

In this work, tribological behaviors and PV limit of chopped carbon fiber, glass fibers and MoS2 reinforced PTFE composites were. investigated. The experiment results revealed that single incorporation of MoS2 could improve anti-wear property significantly under low velocity but shown a failure at 3 m/s. However, glass fibers deteriorated the wear resistance of the FIFE composite drastically as single filler. A synergistic effect was found for the combination of MoS2 and glass fibers, which lead to the best tribological properties with the highest PV limits of 9.5 MPa m/s at 1 m/s and 15 MPa m/s at 2 m/s. (C) 2016 Elsevier Ltd. All rights reserved.
机译:在这项工作中,切碎的碳纤维,玻璃纤维和MoS2增强的PTFE复合材料的摩擦学性能和PV极限是。调查。实验结果表明,单掺MoS2可以显着改善低速下的抗磨性能,但在3 m / s时会失效。然而,玻璃纤维作为单一填充剂极大地降低了FIFE复合材料的耐磨性。发现MoS2和玻璃纤维的组合具有协同作用,这导致了最佳的摩擦学性能,PV极限最高为1 m / s时为9.5 MPa m / s,2 m / s时为15 MPa m / s。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号