Dynamic Adhesion Characteristics of Spherical Sliders Colliding with Stationary Magnetic Disks with a Thin Lubricant Layer

摘要

The dynamic indentation characteristics of 1-and 2-mm-radius hemispherical glass sliders when colliding with stationary magnetic disks under various lubricant conditions were investigated to clarify the dynamic inter-facial forces between flying head sliders and magnetic disks. The collision times were ~15 and ~30 μs, respectively, and independent of the impact velocity. For a 1-mm-radius slider (Ra roughness = 1.71 nm), a clear adhesion force nearly equal to the static pull-off force was observed at the instant of separation when the lubricant thickness was from 1 nm without UV (0.69 nm mobile lubricant thickness) to 3 nm with UV (1.89 nm mobile lubricant thickness). The dynamic adhesion force was maximum when the slider had separated from the disk surface by about 2 nm and dropped from the maximum to zero when the separation reached more than 5 nm. When the mobile lubricant thickness was 0.43 nm, a clear adhesion force was not observed. For a 2-mm-radius slider (Ra roughness = 0.34 nm), a clear adhesion force, similar to the static pull-off force, was observed at the instant of separation at almost all lubricant thicknesses and impact velocities tested except at a small mobile lubricant thickness of 0.43 nm with impact velocities greater than 1.1 mm/s. The dynamic adhesion force dropped from the maximum to zero when the distance traveled from the maximum reached more than 5 nm. These results suggest that the dynamic adhesion force of 1- and 2-mm-radius sliders originates from meniscus formation rather than van der Waals force.