...
首页> 外文期刊>Topics in Catalysis >Deactivation in Continuous Deoxygenation of C_(18)-Fatty Feedstock over Pd/Sibunit
【24h】

Deactivation in Continuous Deoxygenation of C_(18)-Fatty Feedstock over Pd/Sibunit

机译:Pd / Sibunit上C_(18)脂肪原料连续脱氧中的失活

获取原文
获取原文并翻译 | 示例
           

摘要

Catalytic continuous deoxygenation of stearic acid, ethyl stearate and tristearin without any solvents was investigated using Pd/Sibunit as a catalyst in a trickle bed reactor at 300 °C. The main emphasis was to investigate the effect of gas atmosphere and catalyst deactivation. In addition to liquid-phase analysis made offline by GC, also online gas-phase analysis with IR were performed. The main liquid-phase product coming from all reactants was n-heptadecane. In addition to deoxygenation, which was observed for all substrates, also C_(18) and C_(16) alkanes were formed from tristearin. The relative ratios between stearic acid, ethyl stearate and tristearin conversions to alkanes after 3 days time-on-stream were 2.8/2.3/1.0, respectively using 5 % H2/Ar as a gas atmosphere, whereas rapid catalyst deactivation occurred with all substrates under H2-lacking atmosphere. The spent catalyst's specific surface area profile along the downward reactor was maximum in the middle of the catalyst beds with the highest pore shrinking in the beginning and at the end of the reactor catalyst segments in the case of stearic acid and tristearin deoxygenation whereas that decreased consecutively as ethyl stearate passed through the reactor.
机译:在300℃的滴流床反应器中,使用Pd / Sibunit作为催化剂,研究了硬脂酸,硬脂酸乙酯和三硬脂精在没有任何溶剂的情况下的催化连续脱氧反应。主要重点是研究气体气氛和催化剂失活的影响。除了通过GC离线进行液相分析外,还使用IR在线进行了气相分析。来自所有反应物的主要液相产物为正十七烷。除了可以在所有底物上观察到的脱氧之外,还由三硬脂精形成C_(18)和C_(16)烷烃。在运行3天后,硬脂酸,硬脂酸乙酯和三硬脂酸转化为烷烃的相对比率分别为2.8 / 2.3 / 1.0,使用5%H2 / Ar作为气体气氛,而所有底物在以下条件下均迅速发生催化剂失活缺少H2的气氛。沿向下反应器的废催化剂的比表面积分布在催化剂床中间最大,在硬脂酸和三硬脂精脱氧的情况下,在反应器催化剂段的开始和结束时孔收缩最大,而连续下降当硬脂酸乙酯通过反应器时。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号