首页> 外文期刊>Surface & Coatings Technology >An experimental study on synthesizing submicron MoSi2-based coatings using electrotherrnal explosion ultra-high speed spraying method
【24h】

An experimental study on synthesizing submicron MoSi2-based coatings using electrotherrnal explosion ultra-high speed spraying method

机译:电热爆炸超高速喷涂法合成亚微米MoSi2基涂层的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

The MoSi2-based coatings were synthesized on the surface of the low carbon steel substrate using electrothermal explosion ultra-high speed spraying method. Microstructure, phase structure, elements distribution and microhardness of the coatings were characterized by SEM, XRD, EDS and Vickers hardness tester, respectively. It is found that MoSi2 coating and MoSi2 + MoB2 multiphase coating were in-situ formed. The coatings have compact microstructure, submicron-grain and high hardness. The bonding of coating-substrate is metallurgical one. The hardness and microstructure of the MoSi2, coating were improved by boron alloying. The average and highest hardness of the MoSi2 coating are 1340 HV0.2 and 1390 HV0.2, respectively, and that of MoSi2 +MoB2 multiphase coating are 1650 HV0.2 and 1785 HV0.2, respectively. (C) 2007 Elsevier B.V. All rights reserved.
机译:采用电热爆炸超高速喷涂法在低碳钢基材表面合成了MoSi2基涂层。用SEM,XRD,EDS和维氏硬度计分别表征了涂层的显微组织,相结构,元素分布和显微硬度。发现MoSi2涂层和MoSi2 + MoB2多相涂层是原位形成的。该涂层具有致密的微观结构,亚微米晶粒和高硬度。涂层基体的结合是冶金的。硼合金化改善了MoSi2涂层的硬度和微观结构。 MoSi2涂层的平均硬度和最高硬度分别为1340 HV0.2和1390 HV0.2,而MoSi2 + MoB2多相涂层的平均硬度分别为1650 HV0.2和1785 HV0.2。 (C)2007 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号