...
首页> 外文期刊>Transactions of the ASABE >Elucidating the solid, liquid, and gaseous products from batch pyrolysis of cotton gin trash.
【24h】

Elucidating the solid, liquid, and gaseous products from batch pyrolysis of cotton gin trash.

机译:阐明了轧花废料分批热解过程中产生的固体,液体和气体产物。

获取原文
获取原文并翻译 | 示例
           

摘要

Cotton gin trash (CGT) was pyrolyzed at different temperatures (500 degrees C, 600 degrees C, 700 degrees C, and 800 degrees C) using an externally heated batch reactor. The average yields of output products (solid/char, liquid/bio-oil, and gas) were determined. The heating value (HV) of CGT was measured to be around 15.5 MJ kg-1. Gas yield increased while char yield decreased as temperature was increased. The maximum char yield of 38 wt% was obtained after 30 min of pyrolysis at 500 degrees C. The char had the largest fraction of the energy output (44% to 51%), followed by gas (6% to 15%) and bio-oil (4% to 5%). The maximum gas yield of 35 wt% was observed at 800 degrees C. The average yield of CO, H2, and total hydrocarbons (THC) generally increased with increased temperature, while CO2 production decreased. Methane, ethane, and propane were the dominant constituents of the THC. The highest bio-oil yield of about 30 wt% was observed at 600 degrees C. The HV of bio-oil was low (2 to 3 MJ kg-1) due to minimal non-hydrocarbon compounds and high moisture content (MC). The heating value of the organic portion of the bio-oil was measured to be 6.1 MJ kg-1.
机译:使用外部加热的间歇式反应器,在不同温度(500摄氏度,600摄氏度,700摄氏度和800摄氏度)下热轧轧棉废料(CGT)。确定了产出产品(固体/炭,液体/生物油和气体)的平均产量。 CGT的发热量(HV)约为15.5 MJ kg -1 。随着温度升高,气体产率增加而炭产率降低。在500摄氏度下热解30分钟后,最大炭含量为38 wt%。炭的能量输出比例最大(44%至51%),其次是气体(6%至15%)和生物-油(4%至5%)。在800摄氏度时观察到最大气体产率为35 wt%。通常,CO,H <2> 和总烃(THC)的平均产率通常随温度升高而增加,而CO 2 < / sub>产量下降。甲烷,乙烷和丙烷是四氢大麻酚的主要成分。在600摄氏度时观察到最高的生物油收率约30 wt%。由于极少的非烃类化合物,生物油的HV低(2至3 MJ kg -1 )。高水分含量(MC)。经测量,该生物油的有机部分的热值为6.1 MJ kg -1

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号