首页> 外文期刊>Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems >In situ generation of metal clusters in interlamellar spacing of montmorillonite clay and their thermal behaviour
【24h】

In situ generation of metal clusters in interlamellar spacing of montmorillonite clay and their thermal behaviour

机译:蒙脱土层间间距中金属簇的原位生成及其热行为

获取原文
获取原文并翻译 | 示例
           

摘要

Intercalated Ni-Ni(CH3COO)(2)-montmorillonite (1), Ni-0-montmorillonite (11), Zn-Zn(CH3COO)(2)-montmorillonite (III) and Zn-0-montmorillonite(IV) composites have been synthesised and their thermal behaviour is studied by TG, DTG and DTA substantiated by XRD and TEM. The endothermic DTA peaks of the composites I-IV due to dehydration and dehydroxylation, in general, occur at lower temperature compared to those of untreated Na-montmorillonite. The phase change of the clay matrix for the composites I and H takes place at slightly higher temperature compared to Na-montmorillonite, while for the composites III and IV it occurs at lower temperature. XRD data show that the basal spacing (d(0 0 1) value 13.7 Angstrom) of the intercalated metal cluster composite 11 is higher than that of the composite IV (d(0 0 1) value 12.8 Angstrom) at about 300 degreesC revealing intercalated metal cluster of size 4.1 and 3.2 Angstrom, respectively. TEM study shows that the particle size of the metals for the composite II is in the range of about 0-80 nm while for the composite IV, the size range is about 0-30 nm. Therefore, bigger sized metal nanoparticles (> 0.41 nm) are not present in the interlamellar spacing of the clay. (C) 2002 Elsevier Science B.V. All rights reserved. [References: 28]
机译:插层Ni-Ni(CH3COO)(2)-蒙脱石(1),Ni-0-蒙脱石(11),Zn-Zn(CH3COO)(2)-蒙脱石(III)和Zn-0-蒙脱石(IV)复合材料具有合成了它们,并用XRD和TEM证实的TG,DTG和DTA研究了它们的热行为。与未处理的钠-蒙脱土相比,由于脱水和脱羟基,复合物I-IV的吸热DTA峰通常在较低的温度下发生。与钠-蒙脱土相比,复合材料I和H的粘土基体的相变发生在稍高的温度下,而复合材料III和IV的粘土基体的相变发生在较低的温度下。 XRD数据表明,插层金属簇复合物11的基间距(d(0 0 1)值13.7埃)比复合物IV的基间距(d(0 0 1)值12.8埃)在大约300℃时高,这表明插层大小分别为4.1和3.2埃的金属簇。 TEM研究表明,复合材料II的金属的粒径在约0-80nm的范围内,而复合材料IV的金属的粒径在约0-30nm的范围内。因此,在粘土的层间间距中不存在较大尺寸的金属纳米颗粒(> 0.41 nm)。 (C)2002 Elsevier Science B.V.保留所有权利。 [参考:28]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号