Evaluation of the diffusivity and susceptibility to hydrogen embrittlement of API 5LX80 steel welded joints

摘要

This paper presents a study of susceptibility to hydrogen embrittlement of API 5L X80 steel welded joints by SMAW and GTAW processes. By varying the consumables used and the use of the same interpass temperature three different welded joints were obtained. Tests of hydrogen embrittlement susceptibility were performed according to ASTM G129-2006 with an aqueous solution (Solution A - TM0177/2005 NACE) sodium thiosutfate (Ne_2S_2O_3) replacing the bubbling of H_2S. From the elongation values was observed that the joint obtained in all welding conditions showed susceptibility to hydrogen embrittlement, which was determined by the elongation ratio. The joints that showed higher levels of hardness showed higher susceptibility to hydrogen embrittlement. The joints obtained with higher welding speeds for the same amount of heat input presented a reduction in the rate of hydrogen embrittlement. All joints tested in solution showed fracture surfaces with quasi cleavage zones.