...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >Effects of polymer concentration and zone drawing on the structure and properties of biodegradable poly(butylene succinate) film
【24h】

Effects of polymer concentration and zone drawing on the structure and properties of biodegradable poly(butylene succinate) film

机译:聚合物浓度和区域拉伸对可生物降解聚丁二酸丁二酯薄膜结构和性能的影响

获取原文
获取原文并翻译 | 示例

摘要

To produce various biodegradable poly(butylene succinate) (PBS) films for particular use, the effects of initial polymer concentration and zone drawing on the structure, physical properties, and hydrolytic degradation of PBS film were investigated. PBS films were prepared from chloroform solutions with different initial concentrations of 8, 11, 14, 17 and 20 g/dl. In order to investigate the drawing behavior of the PBS films with different solution concentrations, the films were drawn under various zone drawing conditions. Through a series of experiments, it turned out that the initial concentration of PBS solution in chloroform caused significant changes in the draw ratio of the PBS film. That is, the zone draw ratios of the film at initial concentration of 14 g/dl exhibited its maximum values and gradually decreased at higher or lower concentrations. Thus, it was concluded that the initial concentration of 14 g/dl is the optimum polymer concentration to produce maximum draw ratio in this work. In addition, the crystal and amorphous orientations and tensile properties of PBS film having similar draw ratio and similar crystallinity were highest at 14 g/dl and surface crystal morphologies of these films were absolutely different. The hydrolytic degradation rate of the him at 14 g/dl was lowest, but with similar draw ratio, film dimension, and crystallinity, indicating that the degradation behaviors were greatly affected by the initial polymer concentration, orientation, and crystal morphology. (C) 2000 Published by Elsevier Science Ltd. [References: 32]
机译:为了生产各种特殊用途的可生物降解的聚丁二酸丁二酯(PBS)薄膜,研究了初始聚合物浓度和区域拉伸对PBS薄膜的结构,物理性能和水解降解的影响。 PBS薄膜是由氯仿溶液制备的,初始浓度为8、11、14、17和20 g / dl。为了研究具有不同溶液浓度的PBS薄膜的拉伸行为,在不同的区域拉伸条件下对薄膜进行拉伸。通过一系列实验,结果表明,氯仿中PBS溶液的初始浓度导致PBS膜的拉伸比发生了显着变化。即,膜在初始浓度为14g / dl时的区域拉伸比显示出其最大值,并在较高或较低浓度下逐渐减小。因此,可以得出结论,在这项工作中,初始浓度为14 g / dl是产生最大拉伸比的最佳聚合物浓度。另外,具有相似的拉伸比和相似的结晶度的PBS膜的晶体和非晶取向以及拉伸性能最高为14g / dl,并且这些膜的表面晶体形态绝对不同。他在14 g / dl时的水解降解速率最低,但是具有相似的拉伸比,薄膜尺寸和结晶度,表明降解行为受初始聚合物浓度,取向和晶体形态的影响很大。 (C)2000由Elsevier Science Ltd.发布[参考:32]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号