...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >In situ study of structure development in poly(trimethylene terephthalate) fibers during stretching by simultaneous synchrotron small- and wide-angle X-ray scattering
【24h】

In situ study of structure development in poly(trimethylene terephthalate) fibers during stretching by simultaneous synchrotron small- and wide-angle X-ray scattering

机译:同时同步加速器小角度和广角X射线散射原位研究聚对苯二甲酸丙二醇酯纤维拉伸过程中的结构发展

获取原文
获取原文并翻译 | 示例

摘要

In this study, simultaneous synchrotron small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) on as-spun and on spun and subsequently drawn poly(trimethylene terephthalate) (PTT) fibers under cold and hot stretch-hold operations were performed. Crystallinity and orientation analyses were performed on WAXD patterns, while correlation function analysis was used to analyze SAXS patterns to determine the long period. For spun and drawn fibers, WAXD patterns suggested that unit cell dimensions, crystallinity and orientation were dependent on stretching temperature and strain. From orientation analysis, it was reasonable to infer that a rigid amorphous phase existed in the drawn fibers. From SAXS patterns, a defectively stacked lamellar structure was induced at 120 degreesC. Further application of strain up to 100% at 120 degreesC triggered a lamellar to fibrillar transition, as suggested by the formation of a pair of very weak narrow streaks perpendicular to the meridian in the WAXD pattern. These streaks imply a microfibrillar entity. For as-spun fibers, strain could only induce micro-crazes, whose planes are perpendicular to the fiber axis, but could not induce crystallization. At 120 degreesC, WAXD patterns showed that a new transitional phase was formed, which could be transformed to the equilibrium structure with application of strain over 100%. (C) 2001 Elsevier Science Ltd. All rights reserved. [References: 22]
机译:在这项研究中,在冷,热条件下,初纺和纺制并随后拉伸的聚对苯二甲酸丙二醇酯(PTT)纤维同时进行同步加速器小角度X射线散射(SAXS)和广角X射线衍射(WAXD)进行拉伸保持操作。对WAXD图案进行了结晶度和取向分析,而相关函数分析则用于分析SAXS图案以确定长周期。对于纺制和拉伸纤维,WAXD模式表明,晶胞尺寸,结晶度和取向取决于拉伸温度和应变。从取向分析,可以合理地推断出拉伸纤维中存在刚性无定形相。从SAXS图案中,在120℃下诱发有缺陷的叠层结构。如在WAXD模式中形成一对垂直于子午线的非常弱的窄条纹所暗示的那样,在120摄氏度下进一步施加高达100%的应变会触发层状到原纤维的转变。这些条纹暗示着微原纤维实体。对于初生纤维,应变只能诱导微裂纹,其平面垂直于纤维轴,而不能诱导结晶。在120摄氏度时,WAXD模式表明形成了一个新的过渡相,可以通过施加100%以上的应变将其转变为平衡结构。 (C)2001 Elsevier ScienceLtd。保留所有权利。 [参考:22]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号