首页> 外文期刊>Progress in photovoltaics >Experimental and simulation study of thin film silicon solar cells with intermediate reflector
【24h】

Experimental and simulation study of thin film silicon solar cells with intermediate reflector

机译:具有中间反射器的薄膜硅太阳能电池的实验与仿真研究

获取原文
获取原文并翻译 | 示例
           

摘要

Optical and electrical simulations were carried out for thin film silicon solar tandem cells with intermediate reflector layer (IRL) between top and bottom cell and compared with experimental external quantum efficiency and current voltage characteristics results. Reference data were collected from a series of tandem cells with different thicknesses of the top cell absorber layer (160-240nm), the bottom cell absorber layer (1750-2100nm), and the transparent conductive oxides based IRL (10-80nm). It turned out that for capturing correctly the influence of the IRL on the light management as a function of the IRL thickness, the conventional semicoherent approach is not sufficient. Whereas the optical properties of a very thin IRL are governed by interference effects that are best calculated using a fully coherent model, increasingly thicker IRL show a more and more incoherent behavior. By taking into account, the interface morphology and angular light distribution within the cell stack an algorithm for the effective IRL reflectivity was proposed that explains the experimental findings very well. The consecutive electrical simulations were carried out with the device simulator ASA. The dependence of short circuit current density j(sc) and fill factor FF on the thickness d(IRL) of the IRL is in qualitative agreement between simulation and experiment showing coincident extrema in j(sc)(d(IRL)) and FF(d(IRL)) at the current matching point. Copyright (c) 2013 John Wiley & Sons, Ltd.
机译:对在顶部和底部电池之间具有中间反射层(IRL)的薄膜硅太阳能串联电池进行了光学和电学模拟,并与实验外部量子效率和电流电压特性结果进行了比较。从一系列串联电池收集参考数据,这些电池具有不同厚度的顶部电池吸收层(160-240nm),底部电池吸收层(1750-2100nm)和基于IRL的透明导电氧化物(10-80nm)。事实证明,为了根据IRL厚度正确地捕获IRL对光管理的影响,常规的半相干方法是不够的。尽管非常薄的IRL的光学特性受使用完全相干模型最好地计算出的干涉效应支配,但越来越厚的IRL表现出越来越不相干的行为。考虑到细胞堆叠中的界面形态和角光分布,提出了有效IRL反射率的算法,很好地解释了实验结果。使用设备模拟器ASA进行了连续的电气模拟。短路电流密度j(sc)和填充因子FF对IRL厚度d(IRL)的依赖性在仿真和实验之间具有定性一致,表明j(sc)(d(IRL))和FF( d(IRL))在当前匹配点。版权所有(c)2013 John Wiley&Sons,Ltd.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号