首页> 外文期刊>Proceedings of the Institution of Mechanical Engineers, Part D. Journal of Automobile Engineering >Integrated differential braking and electric power steering control for advanced lane-change assist systems
【24h】

Integrated differential braking and electric power steering control for advanced lane-change assist systems

机译:集成式差速制动和电动助力转向控制,用于高级换道辅助系统

获取原文
获取原文并翻译 | 示例
           

摘要

This paper describes the design and verification of a control algorithm for advanced lane-change assist systems with integrated control of the differential braking and the electric power steering system. The objective of the proposed control algorithm of the advanced lane-change assist system is to minimize the unexpected control input of electric power steering and to make maximum use of the differential brake effort. The advanced lane-change assist system can warn of potential rear and side crashes and prevent collisions in lane-change manoeuvres with active intervention when there is an upcoming vehicle with a potential risk to the rear in the next lane. An enhanced lane-change assist warning algorithm is developed with additional information on the estimated past trajectory of the subject vehicle. The upper controller of the advanced lane-change assist system determines the control on-off decision, the desired yaw rate for collision avoidance and the strategic control input distribution. The key strategy of this integrated control algorithm is to use the maximum tyre-road friction of the differential brake force and to operate with a smaller control effort of the electric power steering only when lacking in the level of yaw rate moment obtained by the electronic stability control, which is intended to minimize annoyance to a driver and control intervention. The lower controller decides the control input of the advanced electronic stability control and the electric power steering system. Finally the advanced lane-change assist system is implemented in a real vehicle and tested in both the steering-control-only case and the integrated-control case. It is shown that the proposed strategy can intervene appropriately and verifies the effectiveness of collision avoidance in a dangerous lane-change situation; a decrease in the electric power steering control input of about 20% can be achieved by the proposed algorithm.
机译:本文描述了先进的车道变换辅助系统的控制算法的设计和验证,该系统具有差动制动和电动助力转向系统的集成控制。所提出的高级车道变换辅助系统的控制算法的目的是最大程度地减小电动助力转向的意外控制输入并最大程度地利用差速制动力。先进的车道变换辅助系统可以警告潜在的后方和侧面碰撞,并在有即将到来的车辆在下一车道的后方具有潜在危险的情况下,通过积极的干预来防止在换道操纵中发生碰撞。开发了一种增强的变道辅助警告算法,其中包含有关目标车辆的估计过去轨迹的附加信息。高级车道变更辅助系统的上位控制器确定控制开关决策,避免碰撞所需的横摆率以及战略控制输入分配。这种集成控制算法的关键策略是,利用差速制动力的最大轮胎摩擦力,并仅在缺乏电子稳定性所获得的横摆率力矩水平的情况下,以较小的电动助力转向控制力进行操作控制,旨在最大程度地减少对驾驶员的烦恼并控制干预。下位控制器决定高级电子稳定性控制和电动助力转向系统的控制输入。最终,先进的变道辅助系统在实际车辆中实现,并在仅转向控制的情况和集成控制的情况下进行了测试。结果表明,所提出的策略可以在危险的变道情况下进行适当干预,验证避撞的有效性。所提出的算法可以使电动助力转向控制输入减少约20%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号