首页> 外文期刊>Powder Technology: An International Journal on the Science and Technology of Wet and Dry Particulate Systems >Using spray-dried lactose monohydrate in wet granulation method for a low-dose oral formulation of a paliperidone derivative
【24h】

Using spray-dried lactose monohydrate in wet granulation method for a low-dose oral formulation of a paliperidone derivative

机译:在湿法制粒中将喷雾干燥的乳糖一水合物用于低剂量帕潘立酮衍生物的口服制剂

获取原文
获取原文并翻译 | 示例
       

摘要

Content uniformity (CU) is a crucial evaluation factor, especially for low-dose oral formulations. Spray-dried monohydrate lactose is generally recommended for direct compression/dry granulation, but we observed that it showed advantages in the wet granulation tableting method for low-dose tablet formulation. In this study, several commercial brands of lactose were selected and suitable tableting methods were applied to a low-dose oral formulation of pentyloxyl paliperidone derivative (PD6) with drug loading at 1.5% (w/w) and lower. The effects of spray-dried/sieved/milled monohydrate and anhydrous lactose on CU were investigated. Granules/powder mixtures were studied in terms of their size distribution, repose angle, flowability and bulk/tapped density. In addition, SEM, DSC, CU, tablet weight, hardness, friability and in vitro cumulative release profiles were investigated. The relationships between the powder characteristics and CU results were also studied. Wet granules using spray-dried lactose monohydrate presented satisfied flowability, fair compressibility and a low particle size span compared with all the other tested types of lactose. The product tablets also presented optimal evaluation results for 1.5% (w/w) drug loading (CU = 12.22) and displayed good repeatability among 100 g to 2 kg levels. Further study using another two brands of lactose produced similar results, indicating using spray-dried monohydrate lactose in wet granulation may apply universally to low-dose formulations.
机译:含量均匀性(CU)是至关重要的评估因素,尤其是对于小剂量口服制剂而言。通常建议将喷雾干燥的一水合乳糖用于直接压片/干法制粒,但我们观察到在低剂量片剂的湿法制粒压片方法中它显示出优势。在这项研究中,选择了几个乳糖商业品牌,并将适当的压片方法应用于戊氧基帕潘立酮衍生物(PD6)的低剂量口服制剂,药物载量为1.5%(w / w)和更低。研究了喷雾干燥/筛分/研磨的一水合物和无水乳糖对铜的影响。研究了颗粒/粉末混合物的尺寸分布,休止角,流动性和堆积/堆积密度。另外,研究了SEM,DSC,CU,片剂重量,硬度,脆性和体外累积释放曲线。还研究了粉末特性与CU结果之间的关系。与所有其他测试类型的乳糖相比,使用喷雾干燥的乳糖一水合物制成的湿颗粒具有令人满意的流动性,适度的可压缩性和较低的粒径范围。该产品片剂还显示了1.5%(w / w)载药量的最佳评估结果(CU = 12.22),并且在100 g至2 kg的水平上显示出良好的重复性。使用另外两个品牌的乳糖进行的进一步研究得出了相似的结果,表明在湿法制粒中使用喷雾干燥的一水合乳糖可能普遍适用于低剂量配方。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号