The cokeless cupola furnace uses natural gas to a much better extent than the coke cupola furnace uses coke. Therefore, the necessary quantity of heat for running the cokeless furnace is only half the amount as for a coke cupola of the same capacity. This is based on the heat inputs, with complete combustion of the coke. The C0_2-emission of the cokeless cupola is just 27/100 of the emission of a coke cupola. The silicon burn-off is a heat input of metallurgical cause. It is used optimally when melting, to cover a part of this heat requirement. Finally, the influence of the parameters (burner capacity BC; air/gas ratio, _; and oxygen enrichment, 0_2,air) on the melting capacity and burn-off have to be quantitatively assessed from the measurements and evaluations of previous and future tests.
展开▼