首页> 外文期刊>Solar Physics >Topological Departures from Translational Invariance along a Filament Observed by THEMIS
【24h】

Topological Departures from Translational Invariance along a Filament Observed by THEMIS

机译:由THEMIS观察到的沿细丝平移不变的拓扑偏离

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

We study the topology of the 3D magnetic field in a filament channel to address the following questions: Is a filament always formed in a single flux tube? How does the photospheric magnetic field lead to filament interruptions and to feet formation? What is the relation between feet-related field lines and the parasitic polarities? What can topological analyses teach us about EUV filament channels? To do so, we consider a filament observed on 6 October 2004 with THEMIS/MTR, in Hα with the full line profile simultaneously and cospatially with its photospheric vector magnetic field. The coronal magnetic field was calculated from a “linear magnetohydrostatic” extrapolation of a composite THEMIS-MDI magnetogram. Its free parameters were adjusted to get the best match possible between the distribution of modeled plasma-supporting dips and the Hα filament morphology. The model results in moderate plasma β≤1 at low altitudes in the filament, in conjunction with non-negligible departures from force-freeness measured by various metrics. The filament here is formed by a split flux tube. One part of the flux tube is rooted in the photosphere aside an observed interruption in the filament. This splitted topology is due to strong network polarities on the edge of the filament channel, not to flux concentrations closer to the filament. We focus our study to the northwest portion of the filament. The related flux tube is highly fragmented at low altitudes. This fragmentation is due to small flux concentrations of two types. First, some locally distort the tube, leading to noticeable thickness variations along the filament body. Second, parasitic polarities, associated with filament feet, result in secondary dips above the related local inversion line. These dips belong to long field lines that pass below the flux tube. Many of these field lines are not rooted near the related foot. Finally, the present model shows that the coronal void interpretation cannot be ruled out to interpret the wideness of EUV filament channels.
机译:我们研究灯丝通道中3D磁场的拓扑结构,以解决以下问题:灯丝是否始终在单个通量管中形成?光球磁场如何导致灯丝中断和脚形成?与脚相关的场线与寄生极性之间是什么关系?拓扑分析可以告诉我们有关EUV灯丝通道的哪些信息?为此,我们考虑在2004年10月6日用THEMIS / MTR在Hα中观察到的一根灯丝,其全线轮廓与其光球矢量磁场同时且共空间。冠状磁场是根据合成的THEMIS-MDI磁图的“线性静磁”推算得出的。调整其自由参数,以使模拟的支持血浆的浸液的分布与Hα丝形态之间的最佳匹配。该模型在灯丝低空处导致中等血浆β≤1,并且与通过各种度量标准测得的无力性偏差不可忽略。此处的灯丝由分流的通量管形成。焊剂管的一部分扎在光球中,除了观察到的灯丝中断。这种分裂的拓扑结构是由于灯丝通道边缘上的网络极性很强,而不是由于靠近灯丝的磁通量集中。我们将研究重点放在细丝的西北部。相关的通量管在低海拔高度破碎。这种碎裂是由于两种类型的焊剂浓度低所致。首先,一些会使管局部变形,导致沿灯丝主体的厚度明显变化。其次,与灯丝脚相关的寄生极性会导致在相关的局部反转线上方出现二次下降。这些凹陷属于在磁力线管下方通过的长磁场线。这些场线中许多都没有扎根于相关的脚部。最后,本模型表明不能排除冠状空隙的解释来解释EUV细丝通道的宽度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号