Comparison of the dielectric properties of functionally graded material dielectrics and layered dielectrics used for electric stress control

摘要

Layered dielectric materials are currently in use for electric field stress control, but are limited by charge accumulation at the dielectric-dielectric interfaces. The current work uses micrometric particles to modify the effective permittivity of epoxy resin samples. Two broad kinds of samples are considered: discrete layered material (DLM) samples and functionally graded material (FGM) samples. DLM samples are obtained by bonding layers of epoxy resin with different filler loadings such that abrupt variation in permittivity might occur along the sample thickness. FGM specimens are prepared by hot pressing a comparatively large number of very thin layers of micro-filled epoxy resin with very small differences in permittivity one over the other, thus creating a gradual spatial permittivity gradation. Dielectric properties of FGM and DLM specimens are compared in this study. Space charge accumulation is studied using the pulsed electroacoustic method; the accumulated charge density is seen to be lower in FGM. The uniformity of electric field distribution under applied electric stress is computed, and the field utilisation factor in FGM is seen to have a higher value. Also, the dissipation factor is lower and the short-term breakdown strength is higher in FGM than in DLM samples, providing reason to prefer FGM for insulation to control electric stress.