首页> 外文期刊>Journal of Systems and Control Engineering >Sensorless direct torque control based on nonlinear integral sliding mode controllers for an induction motor drive: Experimental verification
【24h】

Sensorless direct torque control based on nonlinear integral sliding mode controllers for an induction motor drive: Experimental verification

机译:基于非线性整体滑动模式控制器的无传感器直接扭矩控制,用于感应电动机驱动器:实验验证

获取原文
获取原文并翻译 | 示例
           

摘要

In this article, a novel sliding mode adaptation mechanism of a model reference adaptive system speed estimator and a modified sliding mode speed controller are proposed to replace the proportional-integral controller used in the adaptation mechanism of the model reference adaptive system and the proportional-integral speed controller, respectively. The suggested control strategy is designed by sensorless direct torque control with space vector modulation based on a sliding mode speed controller and a model reference adaptive system sliding mode speed estimator. The contribution of this work is the development of one control law based on a modified nonlinear component to overcome the first-order sliding mode control limitations, such as the chattering phenomenon. The performance of the suggested controller-based direct torque control with space vector modulation is verified by digital simulation with different operation conditions, like the abrupt variations in the load torque and the reference speed, using the MATLAB/SIMULINK environment. In fact, such simulation results are experimentally checked utilizing a dSPACE-1104.
机译:在本文中,提出了一种新颖的模型参考自适应系统速度估计器和修改的滑模速度控制器的滑模自适应机制,以替换模型参考自适应系统的适应机制和比例积分的比例积分控制器速度控制器分别。建议的控制策略是由无传感器直接扭矩控制设计的,基于滑动模式速度控制器和模型参考自适应系统滑模速度估计器。这项工作的贡献是基于修改的非线性组件的一个控制定律的发展,以克服一阶滑模控制限制,例如喋喋不休的现象。通过使用MATLAB / SIMULINK环境的突然变化,通过数字仿真验证了具有空间矢量调制的建议控制器的直接扭矩控制的性能,如MATLAB / SIMULINK环境的负载转矩和参考速度的突然变化。实际上,这种仿真结果是通过DSPACE-1104进行实验检查的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号